Look what I got
Thread Starter
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
Look what I got
Got the EFI intake I bought on ebay today. Man this stuff looks great. The TPS is already installed on the TB's 
Check out the pictures here: www.aztechrotary.com/files/tii/efi
Probably not 56k friendly as they are 200-500k pics.
I was thinking about trying to polish the port runners on the LIM what do you all think?
Santiago
Check out the pictures here: www.aztechrotary.com/files/tii/efi
Probably not 56k friendly as they are 200-500k pics.
I was thinking about trying to polish the port runners on the LIM what do you all think?
Santiago
DAMN!! That is PHAT You need to take some better pics of it assembled... Is this going into a NA or Turbo?
What make is it?
I would just polish the runners, because you basically already sacrificed alll the sub 5K power already, and I would doubt you would gain anything or much porting them... So at least make them flow smoother..
You need to take some better pics of it assembled... Is this going into a NA or Turbo?What make is it?
I would just polish the runners, because you basically already sacrificed alll the sub 5K power already, and I would doubt you would gain anything or much porting them... So at least make them flow smoother..
Thread Starter
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
They are going onto my TII. I still need to buy the plenum though. RIght now all I have is the air horns which are for an N/a. The parts seem to be from www.efihardware.com or atleast the TB's. The lowe intake says something on it which I took pics of. I have never seen a website for that company though. It also came with a TPS of some sort which I will be taking pics of right now.
Santiago
Santiago
Thread Starter
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
I took a picture of everything before opening it in case I had to make a claim about damages. Unfortunatly I won't have before and after dyno sheets. I am going to build the car and tune it. No base line runs.
Santiago
Santiago
Thread Starter
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
TPS
Ok I have figured this much out: the TPS that came with it is a "d-hole type" and has "Wabash" on the side of it. From what I can gather its a simple little sensor just like the stock one: power, ground, and signal wires. 
It should be simple to setup on the microtech.
Santiago
It should be simple to setup on the microtech. Santiago
casio isn't here.
Joined: Sep 2002
Posts: 3,332
Likes: 0
From: Greenpoint, Brooklyn
damnit santi! resize the pics first! youre wasting your precious bandwidth.. 
looks good. no pic of all the pieces just laid out on a table or somethin??
attaq iraq?? senseless propaganda..
looks good. no pic of all the pieces just laid out on a table or somethin??attaq iraq?? senseless propaganda..
Trending Topics
Thread Starter
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
I'll have a pic of all the parts later tonight. But for now I do have the pic of them when they were assembled at the guy's house.
www.aztechrotary.com/files/tii/ida
And I have yet to max out my bandwidth :-p
www.aztechrotary.com/files/tii/ida
And I have yet to max out my bandwidth :-p
Last edited by 1987RX7guy; Feb 20, 2004 at 01:50 PM.
Locust of the apocalypse
Joined: Apr 2003
Posts: 2,553
Likes: 2
From: Directly above the center of the earth (York, PA)
I've been looking at that setup for a while..... I'll be following the progress of your install... yeah,,,, you are unwittingly guineapiggin this one for me!!!!
Joined: Oct 2003
Posts: 11,576
Likes: 27
From: Morristown, TN (east of Knoxville)
