2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Look at these plugs. Watcha think?

Thread Tools
 
Search this Thread
 
Old Aug 17, 2004 | 06:38 PM
  #1  
Silverfc88's Avatar
Thread Starter
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2002
Posts: 1,790
Likes: 3
From: Travis AFB, CA to Okinawa, Japan
Look at these plugs. Watcha think?

I changed plugs today and I noticed something different about the old ones, normaly they are black with a little bit of brown. This time they are still black with a little brown, but the brown is real blotchy or in patches. Tell me what you think of them. Not the best pics but they might work.


Front:


Rear:


Oh and do they have to much oil on them? I premix.
Reply
Old Aug 17, 2004 | 06:40 PM
  #2  
Rxmfn7's Avatar
Do a barrel roll!
Tenured Member 20 Years
iTrader: (4)
 
Joined: Oct 2001
Posts: 7,529
Likes: 2
From: Lower Burrell, PA
They look fairly normal. T1 does seem to have slightly excessive carbon deposits. What ratio premix are you running?
Reply
Old Aug 17, 2004 | 06:50 PM
  #3  
Silverfc88's Avatar
Thread Starter
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2002
Posts: 1,790
Likes: 3
From: Travis AFB, CA to Okinawa, Japan
1:1 Ratio. Every time I go to the gas station I put in 8 ounces of 2-cycle to 8 gallons of gas. Maybe to much 2-cycle?

I'm also running all #9's NGK's.
Reply
Old Aug 17, 2004 | 07:22 PM
  #4  
pip's Avatar
pip
the blackest incarnation
Tenured Member 15 Years
 
Joined: Jan 2002
Posts: 760
Likes: 0
From: Milwaukee, Wisconsin
fyi 1oz:1gal is not 1:1
Reply
Old Aug 17, 2004 | 08:10 PM
  #5  
Silverfc88's Avatar
Thread Starter
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2002
Posts: 1,790
Likes: 3
From: Travis AFB, CA to Okinawa, Japan
DOH! 1 ounce oil to 1 gallon gas is 128:1 ratio right?
Reply
Old Aug 17, 2004 | 08:29 PM
  #6  
ddub's Avatar
i am legendary
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 8,478
Likes: 1
From: Kirkland, WA
1oz per 1 gallon is normal, premixing can dirty up plugs faster, I think the general rule is to change every other or every 3rd oil change or something.
Reply
Old Aug 17, 2004 | 08:58 PM
  #7  
poor_red_neck's Avatar
Wait................What?
Tenured Member 10 Years
 
Joined: Apr 2003
Posts: 521
Likes: 0
From: Raleigh/Cary, NC - USA
I thought you weren't supposed to use 2 cycle oil... but the plugs dont look that bad.

When I took the plugs out of mine before summer heat started... both {EDIT, doh!}sides{/EDIT}were pretty much ghost white (running WAAAY too lean)
Reply
Old Aug 17, 2004 | 09:05 PM
  #8  
ddub's Avatar
i am legendary
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 8,478
Likes: 1
From: Kirkland, WA
Originally Posted by poor_red_neck
I thought you weren't supposed to use 2 cycle oil... but the plugs dont look that bad.

When I took the plugs out of mine before summer heat started... both {EDIT, doh!}sides{/EDIT}were pretty much ghost white (running WAAAY too lean)
NOT supposed to use 2 cycle? 2 cycle is what you are SUPPOSED to use for premixing.
Reply
Old Aug 17, 2004 | 09:34 PM
  #9  
RETed's Avatar
Lives on the Forum
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
Plugs look fine.


-Ted
Reply
Old Aug 17, 2004 | 09:38 PM
  #10  
Silverfc88's Avatar
Thread Starter
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2002
Posts: 1,790
Likes: 3
From: Travis AFB, CA to Okinawa, Japan
Cool, thanks.


Does anybody have pics of what a bad plug looks like?
Reply
Old Aug 17, 2004 | 10:17 PM
  #11  
inflatablepets's Avatar
Rotary Enthusiast
 
Joined: Mar 2004
Posts: 1,473
Likes: 0
From: St Louis
I'm curious as to how many miles are on those plugs, they look fine too.
Reply
Old Aug 17, 2004 | 10:25 PM
  #12  
Silverfc88's Avatar
Thread Starter
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2002
Posts: 1,790
Likes: 3
From: Travis AFB, CA to Okinawa, Japan
I ran those for about a month and a half, so I say around 500 miles. I change them as much as I can.
Reply
Old Aug 18, 2004 | 01:30 AM
  #13  
ChildDamien's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 94
Likes: 0
From: Pittsburgh
im gonna set the record straight 1oz to 1 gallon is .25/1 there are 4oz in 1gallon, so for you to have 1:1 you would have 32oz of 2-cycle to 8 gallons of gas
Reply
Old Aug 18, 2004 | 01:40 AM
  #14  
ChildDamien's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 94
Likes: 0
From: Pittsburgh
ack, my bad thats liters....too much kitchen work, yeah its 128 ounces to a gallon
Reply
Old Aug 18, 2004 | 07:21 AM
  #15  
SureShot's Avatar
Seduced by the DARK SIDE
Tenured Member 15 Years
 
Joined: Apr 2001
Posts: 7,323
Likes: 2
From: Orange Park FL (near Jax)
Originally Posted by 95nracer
Does anybody have pics of what a bad plug looks like?
Do you mean like this?
Reply
Old Aug 18, 2004 | 10:00 AM
  #16  
Kenteth's Avatar
Like Ghandi with a gun
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 4,584
Likes: 0
From: Rapid City, SD
Originally Posted by pip
fyi 1oz:1gal is not 1:1
lol, I was like... HOYL CRAP thats alotta premix
Reply
Old Aug 18, 2004 | 10:15 AM
  #17  
MPM's Avatar
MPM
Senior Member
Tenured Member 05 Years
 
Joined: Aug 2003
Posts: 445
Likes: 0
From: Alabama just east of B'ham
Something else to remember. Some premix doesn't mix at the same ratio. You need to read the back of the bottle to be sure.
Reply
Old Aug 18, 2004 | 11:24 AM
  #18  
Silverfc88's Avatar
Thread Starter
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2002
Posts: 1,790
Likes: 3
From: Travis AFB, CA to Okinawa, Japan
[quote] Do you mean like this? [quote]

Damn! Alright I guess mine are good then.
Reply
Old Aug 18, 2004 | 11:54 PM
  #19  
RETed's Avatar
Lives on the Forum
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
Originally Posted by SureShot
Do you mean like this?
It looks like it's burning fine (not too lean or not too rich), but it looks like the motor is burning a lot of oil???


-Ted
Reply
Old Aug 19, 2004 | 02:03 AM
  #20  
dsmrx7's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Aug 2004
Posts: 315
Likes: 0
From: GUAM, USA
Wow, only 500 miles. Those plugs are still good if you ask me...but you didn't...but if you did...well you get the idea. LOL.
Reply
Old Aug 19, 2004 | 04:07 PM
  #21  
Silverfc88's Avatar
Thread Starter
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2002
Posts: 1,790
Likes: 3
From: Travis AFB, CA to Okinawa, Japan
Haha, I guess I just worry to much. I'll run them a little longer and see what they look maybe after 1,000 miles.
Reply
Old Aug 19, 2004 | 04:58 PM
  #22  
JamesWade2002's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 288
Likes: 0
From: Cookeville, TN
premix......what....???GOULETTE!

now wait a minute.... How can you burn to much premix? I thought it burned really really clean? Say I run 70:1. You think I will foul a plug? I think it just means you don't redline enough.
Reply
Old Aug 19, 2004 | 05:29 PM
  #23  
RotaryBuddha's Avatar
CURVE OF CONSTANT WIDTH
Tenured Member 20 Years
iTrader: (4)
 
Joined: Mar 2004
Posts: 2,314
Likes: 1
From: Wesley Chapel, FL
i premix 1oz:1gallon and try to redline at least once a day to keep carbon build-up down. had plugs in for about 12000miles still worked fine. acutally gave them to a friend he cleaned them up with a wire brush and put them in his 1st gen.
Reply
Old Aug 20, 2004 | 10:26 PM
  #24  
RETed's Avatar
Lives on the Forum
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
Originally Posted by JamesWade2002
now wait a minute.... How can you burn to much premix? I thought it burned really really clean? Say I run 70:1. You think I will foul a plug? I think it just means you don't redline enough.
70:1 is starting to get too much.
Keep it over 100:1, and you should not run into fouling problems.


-Ted
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
wretchedegg
General Rotary Tech Support
1
Nov 19, 2025 03:07 AM
Prediict
2nd Generation Specific (1986-1992)
32
Nov 18, 2015 08:41 AM
Aramir
New Member RX-7 Technical
24
Oct 18, 2015 02:39 AM
PinkRacer
2nd Generation Specific (1986-1992)
43
Oct 1, 2015 09:13 AM




All times are GMT -5. The time now is 12:05 PM.