VortecBowtie

How can I get my headlights to stay on without holding the brights when the lights are in the down position? I've seen videos of fc3's driving with just the "peep" hole having light coming through and the lights not up...


Thanks
Mitch

Sgt. Pepper

Pull the headlight retractor fuse in the engine bay.

Houstonderk

iTrader: (3)

You can disconnect the white circle connector to disconnect the motor.

shadow7

iTrader: (3)

you can do that or get JDM FTP's they light up too

13b_cookie_monster

iTrader: (14)

^^ yup either jdm ftp's or you can also check out aaronscake ... he did a simple wiring job to cancel the headlights from popping up

toplessFC3Sman

iTrader: (1)

yea, aaroncake's website has a writeup on how to turn the stock a-spec headlights into daytime running lights... aka the lights are on but not in the up position. the j-spec lights dont actually have the clear passage, in its place they have a separate light and reflector thats controlled independently.

Icemark

Or simply remove Diode D4 from the inside of the light switch and then they only raise when you use the headlight cleaner switch.

toplessFC3Sman

iTrader: (1)

ooh, i like that one ^

magus2222

iTrader: (22)

im not too terribly sure how, but when i bought the car like 1 1/2 years ago, i do believe (and i work with wiring everyday) that the guy actually cut the wire going into the headlight **** relay, wired it with a interupt switch, then rewired it.
again, i havent really taken it apart to find out, but i can turn my headlights on, whilst having them down, and my other lights on, so, idk.
seriously, if it aint broke, dont fix it, it just causes grief for yourself and any possible future owners.

peace

TheDarkRacer

just do the sleepy eye mod with the switch(like on his^^ car and mine) all the switch controls is the headlight motor. And it only controls the headlight going up not down...

VortecBowtie

/\ elaborate a bit please lol


Thanks guys though.

So, so far without buying stuff it's always going to stay down if I mod it? or just act like stock if I don't?

incubuseva

iTrader: (13)

IT'S NOT A MOD!!!



You aren't modifying anything at all, just taking out a fuse.



guh.... tard

phoenix7

incubuseva!

search for DAYTIME RUNNING LIGHTS

micah

I did this. It seemed cool at first, but I soldered that bitch right back in after a month or two. It gets annoying. If you do it, install a switch or something on one of the sides of the diode so you can enable/disable the mod.

There's a way to do something similar with the fog lights so they stay on with brights.... but it escapes me.

TheDarkRacer

um yeas, its a mod, if you are splicing in a switch then it is considered a modification to the wire, its not too hard of a concept to follow....

but to wire in the switch you can pm me so i can pm u the steps I used, or you can search sleepy eye mod and just look for one with a switch. because thats you need is a switch to stop the current flow to the head light motors.


noob cake...

Zokus

Or you can use a relay to ground the appropriate wire going to the switch controls, and thus the lights will turn on every time you turn the ignition.

Icemark

Yuck, DRL are the worst! Like to know the idiot that thought that one up.

TheDarkRacer

^^ rofl i was gonna post something along the line, but i decided i didnt wanna... but hey you said my thoughts exactly... they are soo stupid, it supposedly helps people notice the car... wtf is like going out side on a sunny day with a flash light...

Aaron Cake

iTrader: (1)

Or this way:

http://www.aaroncake.net/rx-7/lights.htm

RTRYPWRD

Wire them as DRL's or go to corksport and buy the FTP lights from jland that have a light built in.