2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

lights go down, but not up!!!

Thread Tools
 
Search this Thread
 
Old Apr 11, 2004 | 07:48 PM
  #1  
rmills1276's Avatar
Thread Starter
zoom zoom in da boom boom
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 103
Likes: 0
From: Naples, FL
Unhappy lights go down, but not up!!!

hi. i have had my 90 gxl for about 32 hours and all of a sudden, one of my headlights wont go up. i pop the hood and see that the arm connected to the motor is disconnected so i connect it and the light stays up. i turn the lights off and it wont go down. so... i took out the fuse for the retractors and i manually lowered it. then i put the fuse back and on go the lights, both are up. i turn them off and one is still up. i guess i can drive around with them up and they still turn on, but i really like the way it looks with both down, without having to manually lower it EVERY frikin time! plz help. btw my first post!
Reply
Old Apr 11, 2004 | 07:51 PM
  #2  
rmills1276's Avatar
Thread Starter
zoom zoom in da boom boom
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 103
Likes: 0
From: Naples, FL
oops. i meant lights go up but not down lol. hey its my first post!
Reply
Old Apr 11, 2004 | 08:03 PM
  #3  
xfeastonarsex's Avatar
fire from MY tailpipe!
Tenured Member 15 Years
iTrader: (5)
 
Joined: Jun 2002
Posts: 1,204
Likes: 1
From: Cincinnati, Oh
My 89 GXL did the same thing for a while, I would check all the wiring to it and make sure all the connections are tight and good. Also check to make sure that when you connected the arm, you connected it correctly, you might have put it in up position when the arm should be down or vise versa...
Reply
Old Apr 12, 2004 | 01:25 AM
  #4  
nightmare77's Avatar
1.3L of Doom
Tenured Member 15 Years
 
Joined: Aug 2003
Posts: 54
Likes: 0
From: san antonio, TX
haha man you got it easy BOTH of mine wont go down! i replaced the switch, and the lightswitch wiring harness and no dice. im really good friends with my fusebox and manual retractor *****. i keep meaning to get it looked at now your post has inspired me to do so
Reply
Old Apr 12, 2004 | 01:12 PM
  #5  
Pattsy's Avatar
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Dec 2002
Posts: 138
Likes: 0
From: Richmond, VA
Do the manual ***** turn easily? I curbed my 7 a month or two ago, and both lights worked fine. Then one day one wouldn't go down (the one on the hit side), i leave them up in the winter in case of ice, etc. Anyways, it was as if the motor was jammed, it took a pair of pliers to loosen it up. It has worked fine since. I think some sand/salt got into the bottom since i lost the boot cover for the ****. Hope this helps some.

Pat
Reply
Old Apr 12, 2004 | 02:37 PM
  #6  
J-Rat's Avatar
Alcohol Fueled!
Tenured Member 20 Years
iTrader: (2)
 
Joined: Jan 2002
Posts: 11,093
Likes: 2
From: Hood River oregon
Just replace the motor. One of mine failed last week and wouldnt budge. New (used) window motor fixed that.
Reply
Old Apr 12, 2004 | 06:01 PM
  #7  
rmills1276's Avatar
Thread Starter
zoom zoom in da boom boom
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 103
Likes: 0
From: Naples, FL
thanks for the help, for now i guess ill just leave em up.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JoesFC
2nd Generation Specific (1986-1992)
9
Oct 5, 2015 08:10 AM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM




All times are GMT -5. The time now is 01:02 PM.