RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   lights go down, but not up!!! (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/lights-go-down-but-not-up-293512/)

rmills1276 04-11-04 07:48 PM

lights go down, but not up!!!
 
hi. i have had my 90 gxl for about 32 hours and all of a sudden, one of my headlights wont go up. i pop the hood and see that the arm connected to the motor is disconnected so i connect it and the light stays up. i turn the lights off and it wont go down. so... i took out the fuse for the retractors and i manually lowered it. then i put the fuse back and on go the lights, both are up. i turn them off and one is still up. i guess i can drive around with them up and they still turn on, but i really like the way it looks with both down, without having to manually lower it EVERY frikin time! plz help. btw my first post!

rmills1276 04-11-04 07:51 PM

oops. i meant lights go up but not down lol. hey its my first post!

xfeastonarsex 04-11-04 08:03 PM

My 89 GXL did the same thing for a while, I would check all the wiring to it and make sure all the connections are tight and good. Also check to make sure that when you connected the arm, you connected it correctly, you might have put it in up position when the arm should be down or vise versa...

nightmare77 04-12-04 01:25 AM

haha man you got it easy BOTH of mine wont go down! i replaced the switch, and the lightswitch wiring harness and no dice. im really good friends with my fusebox and manual retractor knobs. i keep meaning to get it looked at now your post has inspired me to do so

Pattsy 04-12-04 01:12 PM

Do the manual knobs turn easily? I curbed my 7 a month or two ago, and both lights worked fine. Then one day one wouldn't go down (the one on the hit side), i leave them up in the winter in case of ice, etc. Anyways, it was as if the motor was jammed, it took a pair of pliers to loosen it up. It has worked fine since. I think some sand/salt got into the bottom since i lost the boot cover for the knob. Hope this helps some.

Pat

J-Rat 04-12-04 02:37 PM

Just replace the motor. One of mine failed last week and wouldnt budge. New (used) window motor fixed that.

rmills1276 04-12-04 06:01 PM

thanks for the help, for now i guess ill just leave em up.


All times are GMT -5. The time now is 06:35 PM.


© 2024 MH Sub I, LLC dba Internet Brands