Does anyone know where to get the exact heater ose for the left side rear. I cant seem to locate it anywhere in WISC. I have check autozone, checkers and even napa or will I have to cut to fit the ******* hose...which I reall dont want to do. help anyone who has a resource ...thanks


Blvd43

 

http://www.mazdatrix.com/b.htm

 

If that is the long one that has several curves/twists and goes under the oil cooler, I have a brand new one in the wrapper if you want it.
The mazda part #FB01-61-211C.

 

that's the first hose to blow..


oh, and some people always tend to forget that a mazda dealer usually can get mazda parts.

mazdatrix likely has them also.

 

Well when I redid all my heater hoses, I bought about 4 feet worth from NAPA and had to cut to size. It was less than $3. I didn't think sizing was such a pain...

 

Are you talking about the one that goes from the block to the heater core at the firewall? Funny story, I just got this from Napa, it doesn't show up for Manual RX-7 but it does for Auto, and it's the exact same part. So if this is the hose you're talking about, go into a Napa and tell em your car is an auto and see if it comes up.

 

Mine blew just last week - I got a new one from NAPA.

Check your hoses now before it gets REALLY cold.

 

thanks everyone going to napa tommorrow ....hell finally got a day off

 

I was thinking of replacing those heater hoses... what would I look for at Napa, just generic heater hose? Doesn't it have to be "molded" or does that not matter? I'm pretty interested considering Mazdatrix wants $17/per haha...

--Gary

 

Thanks everyone and to Bob the Normal look at this
NAPA Belts and Hoses Hose - Heater

http://www.napaonline.com/cgi-bin/nc...3&prmenbr=5806


Click on image to see enlarged view

Front Item#: NBH10941

Price: $ 25.99
tax and shipping not included

Disclaimer: The stated price may vary from the in store price and may change at anytime.

Usually ships in 24 hours.


Attributes:
Attributes: Hose - Heater
I.D.(s): .62'' x .62'' x .62''
Length: 20.9''

 

From Gates Rubber Company

http://www.gates.com/part_locator/in...cation_id=3002

1986 Mazda RX-7 2-Rotor 1.3 L
Application Product Type Part # Comments
Belt Drive System

Front End Accessory Drive Components

Fan & Alt.
High Capacity V-Belt (Standard) 7320
P.S.
High Capacity V-Belt (Standard) 9420
A.C.; W/Nippondenso A.C. Compr.
High Capacity V-Belt (Standard) 9385
A.C.; W/Sanden A.C. Compr.
High Capacity V-Belt (Standard) 9380
Fan & A.P.; W/O Turbo
High Capacity V-Belt (Standard) 7355
Fan & A.P.; W/Turbo
High Capacity V-Belt (Standard) 7385

Cooling System

Coolant Hose

Upper
Molded Coolant Hose 20380 (A)
Flexible Coolant Hose (Standard) 25804
Lower
Molded Coolant Hose 20900
Flexible Coolant Hose (Standard) 25473
Heater To Eng.; W/Auto. Trans.
Molded Heater Hose 18941
Pipe To Eng.
90º Molded Heater Hose 28467 Cut to fit
Eng. To Throttle Body; W/O Turbo
Molded Heater Hose 18021 Cut to fit
Throttle Body To Valve
Straight Heater Hose (Standard) 28408 (16")
Valve To Intake Manifold; W/Turbo
Molded Heater Hose 18020 Cut to fit
Radiator Caps & Testers

Radiator Cap
Safety Release Radiator Cap 31533 Check hood clearance prior to installing this cap
Regular Radiator Cap 31333
Cooling System Adapter
Radiator Cap/Cooling System Tester Adapter 31428
Cap Adapter
Radiator Cap/Cooling System Tester Adapter 31378
Thermostats, Seals & Gaskets

Thermostat
Premium Thermostat 33188S
Regular Thermostat 33188
Thermostat Gasket
Thermostat Gasket 33644

Fuel System

Fuel Caps & Testers

Fuel Cap
Regular Fuel Cap 31613
Regular Locking Fuel Cap 31708
Fuel Cap Tester Adapter
Fuel Cap/System Tester Adapter 12410 (Threaded) Threaded adapter connected to tester

Oil & Lubrication System

Oil Caps

Oil Filler Cap
Oil Filler Cap 31083

Steering System

Power Steering Hose

Pressure; W/12mm End Fittings
Pressure Line Assembly 359820
Pressure; W/16mm End Fittings
Pressure Line Assembly 358890
Return - Cooler To Pump
Multi-Use Return Hose (Standard) 350010 (10")

 

I also found a Advance auto part hose too... see below

Drive-Rite 304360
MOLDED HEATER HOSE

http://www.partsamerica.com/PartDeta...tNumber=304360