Left rear Heater Hose
Does anyone know where to get the exact heater ose for the left side rear. I cant seem to locate it anywhere in WISC. I have check autozone, checkers and even napa or will I have to cut to fit the fucking hose...which I reall dont want to do. help anyone who has a resource ...thanks
Blvd43 |
|
If that is the long one that has several curves/twists and goes under the oil cooler, I have a brand new one in the wrapper if you want it.
The mazda part #FB01-61-211C. |
that's the first hose to blow..
oh, and some people always tend to forget that a mazda dealer usually can get mazda parts. ;) mazdatrix likely has them also. |
Well when I redid all my heater hoses, I bought about 4 feet worth from NAPA and had to cut to size. It was less than $3. I didn't think sizing was such a pain...
|
Are you talking about the one that goes from the block to the heater core at the firewall? Funny story, I just got this from Napa, it doesn't show up for Manual RX-7 but it does for Auto, and it's the exact same part. So if this is the hose you're talking about, go into a Napa and tell em your car is an auto and see if it comes up.
|
Mine blew just last week - I got a new one from NAPA.
Check your hoses now before it gets REALLY cold. |
thanks everyone going to napa tommorrow ....hell finally got a day off
|
I was thinking of replacing those heater hoses... what would I look for at Napa, just generic heater hose? Doesn't it have to be "molded" or does that not matter? I'm pretty interested considering Mazdatrix wants $17/per haha...
--Gary
Originally Posted by torean
Well when I redid all my heater hoses, I bought about 4 feet worth from NAPA and had to cut to size. It was less than $3. I didn't think sizing was such a pain...
|
Thanks everyone and to Bob the Normal look at this
NAPA Belts and Hoses Hose - Heater http://www.napaonline.com/cgi-bin/nc...3&prmenbr=5806 Click on image to see enlarged view Front Item#: NBH10941 Price: $ 25.99 tax and shipping not included Disclaimer: The stated price may vary from the in store price and may change at anytime. Usually ships in 24 hours. Attributes: Attributes: Hose - Heater I.D.(s): .62'' x .62'' x .62'' Length: 20.9'' |
From Gates Rubber Company
http://www.gates.com/part_locator/in...cation_id=3002 1986 Mazda RX-7 2-Rotor 1.3 L Application Product Type Part # Comments Belt Drive System Front End Accessory Drive Components Fan & Alt. High Capacity V-Belt (Standard) 7320 P.S. High Capacity V-Belt (Standard) 9420 A.C.; W/Nippondenso A.C. Compr. High Capacity V-Belt (Standard) 9385 A.C.; W/Sanden A.C. Compr. High Capacity V-Belt (Standard) 9380 Fan & A.P.; W/O Turbo High Capacity V-Belt (Standard) 7355 Fan & A.P.; W/Turbo High Capacity V-Belt (Standard) 7385 Cooling System Coolant Hose Upper Molded Coolant Hose 20380 (A) Flexible Coolant Hose (Standard) 25804 Lower Molded Coolant Hose 20900 Flexible Coolant Hose (Standard) 25473 Heater To Eng.; W/Auto. Trans. Molded Heater Hose 18941 Pipe To Eng. 90º Molded Heater Hose 28467 Cut to fit Eng. To Throttle Body; W/O Turbo Molded Heater Hose 18021 Cut to fit Throttle Body To Valve Straight Heater Hose (Standard) 28408 (16") Valve To Intake Manifold; W/Turbo Molded Heater Hose 18020 Cut to fit Radiator Caps & Testers Radiator Cap Safety Release Radiator Cap 31533 Check hood clearance prior to installing this cap Regular Radiator Cap 31333 Cooling System Adapter Radiator Cap/Cooling System Tester Adapter 31428 Cap Adapter Radiator Cap/Cooling System Tester Adapter 31378 Thermostats, Seals & Gaskets Thermostat Premium Thermostat 33188S Regular Thermostat 33188 Thermostat Gasket Thermostat Gasket 33644 Fuel System Fuel Caps & Testers Fuel Cap Regular Fuel Cap 31613 Regular Locking Fuel Cap 31708 Fuel Cap Tester Adapter Fuel Cap/System Tester Adapter 12410 (Threaded) Threaded adapter connected to tester Oil & Lubrication System Oil Caps Oil Filler Cap Oil Filler Cap 31083 Steering System Power Steering Hose Pressure; W/12mm End Fittings Pressure Line Assembly 359820 Pressure; W/16mm End Fittings Pressure Line Assembly 358890 Return - Cooler To Pump Multi-Use Return Hose (Standard) 350010 (10") |
I also found a Advance auto part hose too... see below
Drive-Rite 304360 MOLDED HEATER HOSE http://www.partsamerica.com/PartDeta...tNumber=304360 |
All times are GMT -5. The time now is 09:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands