Just found this site. Can you help me out with my 89 TII
#1
Junior Member
Thread Starter
Join Date: Mar 2003
Location: tri state area
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Just found this site. Can you help me out with my 89 TII
Hey guys, I am looking foreward to learning more about my beloved TII from you. I have been an avid fan of rx7s for a long time but still have a lot to learn. Here's the deal right now, I just baught a very very nice 89 red tII that I will probably keep forever because it is the nicest one that I have ever saw around here and I have wanted a series 5 for a long time and finally got a great deal on one. It has many mods already but someone got their skinners on it and took the upper intake off adn didn't get it back together so, I could use some help as I get it back together and further modify my baby! Ok, under the upper intake, right on top of the center rotor housing, there is something there that I can not identify adn really need to know what this is. It is bolted to the top of the rotor housing with two bolts and opens toward the drivers side with a round opening about an inch and a half or so, it looks like there is something missing there but I have no idea what this is. It isn't on the series 4 engines at all, just a raised flat spot on the rotor housing. Can anyone tell me what this is? The engine may even be a j spec engine because another engine has been put in it lately. thanks for any help guys!
#3
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
can you get a pic? I have no idea what is there...
here is some pics of mine from last week. but I had already removed the whole metal vac rack.
http://www.1300cc.com/UIM
I now have some finished pics I'll add them tonight.
here is some pics of mine from last week. but I had already removed the whole metal vac rack.
http://www.1300cc.com/UIM
I now have some finished pics I'll add them tonight.
#4
Junior Member
Thread Starter
Join Date: Mar 2003
Location: tri state area
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Hey Scott, man, you are everywhere huh? I am black turbo II on teh other forum, I just wanted to see if anyone else has any information on this thing that I am looking for. I tried to put an arrow on your pic where this thing goes but it won't post it for some reason. It mounts with two bolts right betwee the two little square things on top of the rotor housings on that flat space that is raised a little yours doesn't even have the bolt holes for it! I took the upper intake off this evening so I can take a picture of this thing, can I get your email so that I can send it to you when I take it I can't get this site to work for me. thanks man...
#5
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Mar 2003
Location: tri state area
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Cool, thanks man I will snap some pics of this thing asap and send some to you, I will also try to post them on here again if anyone else is interested or might possibly know what it is? what it does, etc? I will try to get some pics today if I can find my junk camera.
#9
Junior Member
Thread Starter
Join Date: Mar 2003
Location: tri state area
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Hey, I got some pics adn I am going to try to post them again, hope it works this time...If anyone can tell me what this is, what it does and if it is very important (can it be blocked?) well, they still won't go, can you post them for me Scott? I will email them to you thanks everybody, hope someone can identify this thing...
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
acha3
2nd Generation Specific (1986-1992)
7
09-06-15 08:14 AM