2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Just did Tranny Swap, Don't recall how Starter was Wired

Thread Tools
 
Search this Thread
 
Old Jul 13, 2006 | 09:36 PM
  #1  
TaiFC's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 16
Likes: 0
From: Georgia
Angry Just did Tranny Swap, Don't recall how Starter was Wired

Hey Crew,

Finally started putting my car back together after pulling my tranny out almost a month ago. After putting everything back together, the only thing left was the Starter. I couldn't recall which wire went where. So Frustrated because I almost got this done but the car won't start. What I need is a simple "This wire went here, this went here" explanation. Thank you guys.
Reply
Old Jul 14, 2006 | 12:37 AM
  #2  
Cusco20B's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Dec 2005
Posts: 21
Likes: 0
From: North Hollywood, CA
One positive to the starter solenoid big bolt, the other big bolt is the wire coming from the starter and the small clip is for your ignition switch. Its simple enough.
Reply
Old Jul 14, 2006 | 08:50 AM
  #3  
TaiFC's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 16
Likes: 0
From: Georgia
That indeed is easy enough but you only mentioned 2 of the three dangling wires. A thick gauge one, a thinner one and also the one going on the clip. You pointed out the one wire going on the longer bolt and I know of the wiring going from my starter to my solenoid but there is still one more wire down there. Thank you for the replys.
Reply
Old Jul 14, 2006 | 11:29 AM
  #4  
walken's Avatar
Registered Loser
Tenured Member 05 Years
iTrader: (6)
 
Joined: Dec 2002
Posts: 2,224
Likes: 0
From: Whiterock
looking at it from the back. The left bolt has a wire that comes from the starter itself. The right bolt goes to the power from the car. Above the starter therse is a big ground wire that bolts to the starter/transmission bolt.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BLK 93
3rd Generation Specific (1993-2002)
4
Aug 19, 2015 03:47 AM
Professorpeanutrx7
New Member RX-7 Technical
5
Aug 15, 2015 01:38 PM




All times are GMT -5. The time now is 08:05 PM.