Jun's plans, i need help
#1
Accepting TII funds
Thread Starter
Join Date: Aug 2005
Location: OR
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Jun's plans, i need help
Ok, so my car has been down for a while due to finance problems, but tax time is coming
up so I plan to get my rebuild going as well as a decent setup. Here's what I had in mind:
Rebuild with internal upgrades such as FD corner seal springs, etc
BNR Stage 1 or 2
Full or half bridge port (street car, not my DD)
Rtek 1.7
720cc secondaries
FMIC
etc, etc
I have a few questions with this setup:
Will I need a custom intake manifold to go with the bridge port?
Will the port be too big for the turbo? Bigger turbo?
Hard to pass emissions?
Anything important I'm missing about a bridge ported engine?
Also an important note, the car already has a 3" downpipe and exhaust. I'd like to pass
emissions, but is that goal too farfetch'd with this setup? I'm open to considering a large
streetport, but I'd looooove to have a bridge for the street.
Any help is appreciated. Thanks in advance.
up so I plan to get my rebuild going as well as a decent setup. Here's what I had in mind:
Rebuild with internal upgrades such as FD corner seal springs, etc
BNR Stage 1 or 2
Full or half bridge port (street car, not my DD)
Rtek 1.7
720cc secondaries
FMIC
etc, etc
I have a few questions with this setup:
Will I need a custom intake manifold to go with the bridge port?
Will the port be too big for the turbo? Bigger turbo?
Hard to pass emissions?
Anything important I'm missing about a bridge ported engine?
Also an important note, the car already has a 3" downpipe and exhaust. I'd like to pass
emissions, but is that goal too farfetch'd with this setup? I'm open to considering a large
streetport, but I'd looooove to have a bridge for the street.
Any help is appreciated. Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
distr0
Canadian Forum
3
10-07-15 08:17 AM
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM