Juno - My FC Build Thread
#51
Brap Brap Psshh
Thread Starter
Join Date: Apr 2008
Location: Colorado Springs
Posts: 1,669
Likes: 0
Received 0 Likes
on
0 Posts
Just put on the hks intercooler this weekend. Tried to do the power steering too, but it started snowing on me. Makes me realize how badly I need a frickin garage! Also finally bought some tools too, it was always such a pain going to friends houses to work on my car. Anyways, here's some pics.
Talk about perfect fitment...
So I still need to do my power steering, add the g-master super angle kit, buy speedjunkies gauge set-up (boost, water temp, and oil temp gauges) by an afr gauge and put them all in before march 27th.... I'm running out of time.
Talk about perfect fitment...
So I still need to do my power steering, add the g-master super angle kit, buy speedjunkies gauge set-up (boost, water temp, and oil temp gauges) by an afr gauge and put them all in before march 27th.... I'm running out of time.
#55
Brap Brap Psshh
Thread Starter
Join Date: Apr 2008
Location: Colorado Springs
Posts: 1,669
Likes: 0
Received 0 Likes
on
0 Posts
I actually was just looking at those. I might hold off for now, I'm building a custom pod to hold three gauges where my front vent is, so I wanted WT, OT, and AFR there and put the boost gauge right above my steering wheel. But I'll just put the boost gauge there for now, and when I have the extra cash I'll get the AFR... I had no idea they were over $200 until today, haha.
#56
dorito powered
iTrader: (5)
Join Date: Mar 2008
Location: Lincoln, NE
Posts: 2,839
Likes: 0
Received 0 Likes
on
0 Posts
you mean under? prices on widebands have gone way down lately. The lc1/xd16 combo used to be 380-400 two years back, now its just under 300. and the AEM Uego used to be 300 and now its around 170.
#57
Brap Brap Psshh
Thread Starter
Join Date: Apr 2008
Location: Colorado Springs
Posts: 1,669
Likes: 0
Received 0 Likes
on
0 Posts
Going on their site and including the warranty, Innovative is $200, AEM is $220, and another cheapo one I found started at $180, so yeah... above $200
#60
Brap Brap Psshh
Thread Starter
Join Date: Apr 2008
Location: Colorado Springs
Posts: 1,669
Likes: 0
Received 0 Likes
on
0 Posts
I'm buying my friends this week. He's got a tree fiddy and is swapping to the aem one, so I'm taking his plx one off his hands. Only has had it a few months.
Lol, what's ghetto about my engine bay? I haven't cleaned it since I did the swap, so it's a little dirty, but ouch man! Haha
Lol, what's ghetto about my engine bay? I haven't cleaned it since I did the swap, so it's a little dirty, but ouch man! Haha
#64
Brap Brap Psshh
Thread Starter
Join Date: Apr 2008
Location: Colorado Springs
Posts: 1,669
Likes: 0
Received 0 Likes
on
0 Posts
#70
High Comp Booster
iTrader: (4)
Join Date: Apr 2009
Location: Oakville, Ontario
Posts: 1,907
Likes: 0
Received 0 Likes
on
0 Posts
I don't think id take the hood off at a drift event the hood helps push air down on to your intercooler and good find by the way those are hard to get lol the only thing Id do is clean up the charge piping by getting a BOV flange welded on to the charge tank of the intercooler
Also you could easily ghetto fab a intercooler sprayer for when it gets hot or right before a run spray water on to the intercooler to help drop the temps You can use your windsheild washer for that Or I don't know if american cars came with it you can use the headlight washer system to spray the intercooler All canadian cars came with them
Also you could easily ghetto fab a intercooler sprayer for when it gets hot or right before a run spray water on to the intercooler to help drop the temps You can use your windsheild washer for that Or I don't know if american cars came with it you can use the headlight washer system to spray the intercooler All canadian cars came with them
#74
Brap Brap Psshh
Thread Starter
Join Date: Apr 2008
Location: Colorado Springs
Posts: 1,669
Likes: 0
Received 0 Likes
on
0 Posts
Lol, I know it's ghetto, but the couplers were tearing in the middle, not popping off. I have some high psi ones, and with the new ic, it holds all day. One day I'll un-ghettofy the engine.... one day. For now I have more pressing issues to deal with.
#75
Brap Brap Psshh
Thread Starter
Join Date: Apr 2008
Location: Colorado Springs
Posts: 1,669
Likes: 0
Received 0 Likes
on
0 Posts
Finally got done putting in my new gauges (Boost, Water Temp and Oil Temp) Now I just gotta paint it black to match the interior. Looks really good imo.