Im having a problem with the air bleeders for the injectors on the LIM, these are the brown guides that sit under the injectors. The Jdm t2 lim has a steeper air bleeder hole then the us spec t2 lim, which is causing my injectors to flop up and down. And yes I have the upper and lower gromment on my injectors, I went to mazdatrix.com and it doesnt list a spacer or any other info on jdm spec air bleeders. If you take a jdm t2 and us spec t2 lim and look at the injector air bleeder holes you can cleary tell that the jdm one is machined deeper, which wont allow to use the us spec bleeder, anybody have an idea why? thanks