intercooler too big?
12-22-03, 06:23 PM
#2
Lives on the Forum
How does the inlet/outlet face? If they face outwards, it's definitely not going to fit. The FC only has 26" maximum of space between the frame rails, so 27" is too wide.
-Ted
-Ted
12-23-03, 06:56 AM
#6
Senior Member
Join Date: Jan 2002
Location: Minnesota/ California
Posts: 600
Likes: 0
Received 0 Likes
on
0 Posts
I see a Mitsubishi logo on that core don't I?
I have a 27 x 8 x 4 Spearco and the inlets face towards the firewall (northside).
27" is a perfect fit up front and you shouldn't have to cut your reforcement bumper, however with the inlets where they are you'll have to position it like in your photo with the inlets on the bottom and run the tubing under the lights.....Most guys I see run it this way. When I bought my Spearco I wanted the shortest route and by having the inlets face the firewall on the north side of the IC I only have 2 bends.... Its alot like Alf's set up was...I had mine first though
I have a 27 x 8 x 4 Spearco and the inlets face towards the firewall (northside).
27" is a perfect fit up front and you shouldn't have to cut your reforcement bumper, however with the inlets where they are you'll have to position it like in your photo with the inlets on the bottom and run the tubing under the lights.....Most guys I see run it this way. When I bought my Spearco I wanted the shortest route and by having the inlets face the firewall on the north side of the IC I only have 2 bends.... Its alot like Alf's set up was...I had mine first though
Thread
Thread Starter
Forum
Replies
Last Post
FC3S Timmy
2nd Generation Specific (1986-1992)
8
10-02-15 08:08 AM
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM
