2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Intake manifold to Engine O-rings

Thread Tools
 
Search this Thread
 
Old 02-05-06, 07:41 AM
  #1  
I just wanna hump my car.

Thread Starter
iTrader: (3)
 
NeCr0mStR's Avatar
 
Join Date: May 2002
Location: Lansing area Michigan
Posts: 841
Likes: 0
Received 1 Like on 1 Post
Intake manifold to Engine O-rings

So on the RB website it shows these

http://www.racingbeat.com/FRmazda2.htm

I don't remember having put them on... I don't know why I didn't have any extra o-rings in my pack of of gaskets and o-rings from my engine. Someone wanna explain where they go?

Thanx
Old 02-05-06, 09:13 AM
  #2  
Engine, Not Motor

iTrader: (1)
 
Aaron Cake's Avatar
 
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes on 91 Posts
Your link doesn't work.

But I assume you mean the two o-rings that go between the lower intake and the block?

Only used on 13BTs and 12As. If you don't use them, you'll get leaks in very short order. One ring goes in each coolant passage on each housing. They seal between the housing and the lower intake manifold.
Old 02-05-06, 10:37 AM
  #3  
affen

 
speed_monkey's Avatar
 
Join Date: Sep 2004
Location: Tucson, AZ
Posts: 913
Likes: 0
Received 0 Likes on 0 Posts
In order to link to RB, you have to right click, properties, then copy the link from there.
Old 02-05-06, 12:23 PM
  #4  
I just wanna hump my car.

Thread Starter
iTrader: (3)
 
NeCr0mStR's Avatar
 
Join Date: May 2002
Location: Lansing area Michigan
Posts: 841
Likes: 0
Received 1 Like on 1 Post
ok I am not using 12a or 13bt so I need not worry I would assume since my 13b did not have them

once again stellar job with the help thank you people
Old 02-05-06, 03:47 PM
  #5  
Engine, Not Motor

iTrader: (1)
 
Aaron Cake's Avatar
 
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes on 91 Posts
Originally Posted by speed_monkey
In order to link to RB, you have to right click, properties, then copy the link from there.
Still didn't work...And why would it, considering both lead to the same address...
Old 02-05-06, 04:20 PM
  #6  
I'm a boost creep...

 
NZConvertible's Avatar
 
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes on 8 Posts
He means when copying a link from the RB site, thus...

http://www.racingbeat.com/resultset....rtNumber=16735
Old 02-05-06, 05:55 PM
  #7  
Engine, Not Motor

iTrader: (1)
 
Aaron Cake's Avatar
 
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes on 91 Posts
Much better...Yep, those are the 13BT/12A manifold to housing o-rings. Not needed for the NA 13B.
Old 02-05-06, 06:23 PM
  #8  
Drift Made To Order

 
tancred's Avatar
 
Join Date: Apr 2003
Location: Salt Lake City, Utah
Posts: 150
Likes: 0
Received 0 Likes on 0 Posts
Just bought 3, just in case...since im doing this fix anyways.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
C. Ludwig
Single Turbo RX-7's
49
01-30-19 06:31 AM
Engine stand ready
New Member RX-7 Technical
3
08-14-15 10:26 PM



Quick Reply: Intake manifold to Engine O-rings



All times are GMT -5. The time now is 02:21 AM.