i am going to be putting a 89-91 intake manifold non -turbo on my 87 and wanted to know where am i going to be putting some of the vacuum hoses and how to get the 6ports working or should i just take them out and how to get the vdi working and i seen that web site that
shows how to do it but it does not tell how to do some things

 

bumpity

 

bump!

 

Well, the lower manifold isnt going to fit...

 

why is it not going to fit is that the one that goes to the engine and if it is it is on the car i just have to put the other parts on

 

go here and look at the write up. very good info on how to do this mod http://homepage.mac.com/carldavis/main/main.html

 

i said that i seen the website that shows how to do but i still have questions

 

bump

 

don't any body know where some of the vacuum hoses
go or some of the other things that i need to do

 

bump

 

i was told that basically anywhere would be fine for the vacuum hoses as long as it has the same size output, not positive, but i was told

 

NM, i read your question wrong.
Thought you where putting a 89-91 Turbo manifold on your 87 NA...