intake for a 88 rx7
intake for a 88 rx7
Full Member
Joined: Dec 2001
Posts: 136
Likes: 0
From: Fresno, CA
get a AirFlow sensor Adaptor from www.k2rd.com ($25) and a cone filter ($30) and you have an aftermarket Intake 
or go to www.rx7.com Thats rotary performance out of texas. They have nice kits for about $115.
Rattle can retard
Joined: Jul 2001
Posts: 660
Likes: 0
From: St. Peters, MO
You can get a cheap one off E-bay for 25 that includes the adapter and filter. Not the best thing but it will do, then you can replace the filter later with a K&N. You will need a breather filter for the airpump too. Go to a local parts shop and pick one up for under $10. You will want to look into making a cold air box if you want it to be good. Otherwise you just suck up hot engine air all the time. www.fc3s.org has a how-to on it. It's pretty simple.
Passenger
Posts: n/a
IMO the kits like the Apex-i and Bonez and what not are overpriced and over rated, Ihad the Apexi one and it was all asthetics, it came with a real neato adapter so I didnt have to buy a $5 small filter for the airpump... waste IMO
just get the adapter, cone ($10 at autozone) and a small filter for the airpump pipe...
Then go do a cold air mod like I did on jefcard.rx7life.com
just get the adapter, cone ($10 at autozone) and a small filter for the airpump pipe...
Then go do a cold air mod like I did on jefcard.rx7life.com
Thread
Thread Starter
Forum
Replies
Last Post
