dumarjo

Hi all,


I just receive my A/C kit

-compressor
-evaporator
-condensor
-valve
-hoses
-etc...

I want to know where I can get the installation process.

The only thing I need is the mounting picture of the a/c. I try to find it in the manual shop but not luck.

thanx

Jonathan

Turbonut

iTrader: (1)

Mounting of A/C?
Condenser, evap, or compressor?
Or all?

Aaron Cake

iTrader: (1)

Get the Haynes manual. Has lots of good pictures.

dumarjo

all

dumarjo

for the haynes is it a good book for rx-7 ??? i project too buy one ...

thanx

autocrash

well.. uhmm, if you are asking if the haynes manual is good: yes, better for the RX-7 than for some other cars I've worked on.

But it works even better when combined with the FSM!

dumarjo

can I download the FSM manual somewhere ??

autocrash

www.fc3s.org

dumarjo

I donM't find enought information for the a/c system. does anybody have a more complete picture of this. ??

Samps

I'm not sure where you got all of the AC components. But if your car did not previously have AC then there are a number of small clamps and pipes that will be necessary to complete the install. If your car used to not have AC, I would be interested in buying the piece that connects the blower motor to the heater core off of you, which will be replaced by either the evaporator or condenser (I always get them mixed up). You will probably also need the logicon with the AC button.

dumarjo

I have all the small hose but I thing I doesnM't have the clamp. My car doesn't come with A/C. My logicon have the a/c button. I doesn't have the bolt for installiing it. I try to find all the bolt but it'is not easy to find.