injectors not working
#1
Full Member
Thread Starter
Join Date: Apr 2005
Location: California
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
injectors not working
hey guys, when i jumper the connector i cant hear the fuel injectors anymore, but when i push on the connector i can hear fuel going to the injectors, also i noticed that i accidentally switched the 2 fuses that i pulled to unflood the engine to the 40 on top and 30 on bottom, what can my problem be?
#2
Full Member
Thread Starter
Join Date: Apr 2005
Location: California
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Listen, as i stated in the first post, i accidently switched the fuses and the other thing, i jumpered the connecter for the fuel pump to work to see if it is working properly, <edited for content>
Last edited by Aaron Cake; 08-29-05 at 03:17 PM.
#3
...94% correct.
You accidently switched the fuses? So? Why were you switching fuses to begin with? Switching fuses isn't going to cause a no-run situation.
Read the questions so we can help you.
Read the questions so we can help you.
Last edited by Aaron Cake; 08-29-05 at 03:16 PM.
#4
Originally Posted by mesallem
hey guys, when i jumper the connector i cant hear the fuel injectors anymore, but when i push on the connector i can hear fuel going to the injectors, also i noticed that i accidentally switched the 2 fuses that i pulled to unflood the engine to the 40 on top and 30 on bottom, what can my problem be?
There is nothing in there that states this is a continuance from a previous post. If you had another thread about this problem, why did you start a new one?
This is a vague as me saying "i pulled a wire of the thing in im engine compartment and now it doesnt run anymore. what was that wire for?" Either go back and post on your original thread, or put a little more info on this one so people know what your talking about.
#5
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 22 Likes
on
20 Posts
888888888hey guys, when i jumper the connector i cant hear the fuel injectors anymore88888888888
Frankly speaking, that does not make a bit of sense. There's no plug that you can jumper and make the fuel injectors operate.
*********also i noticed that i accidentally switched the 2 fuses that i pulled to unflood the engine to the 40 on top and 30 on bottom, ****************
As long as neither fuse blew, then just put them back where they belong.
Frankly speaking, that does not make a bit of sense. There's no plug that you can jumper and make the fuel injectors operate.
*********also i noticed that i accidentally switched the 2 fuses that i pulled to unflood the engine to the 40 on top and 30 on bottom, ****************
As long as neither fuse blew, then just put them back where they belong.
Last edited by Aaron Cake; 08-29-05 at 03:17 PM.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM