hey guys, when i jumper the connector i cant hear the fuel injectors anymore, but when i push on the connector i can hear fuel going to the injectors, also i noticed that i accidentally switched the 2 fuses that i pulled to unflood the engine to the 40 on top and 30 on bottom, what can my problem be?

 

Listen, as i stated in the first post, i accidently switched the fuses and the other thing, i jumpered the connecter for the fuel pump to work to see if it is working properly, <edited for content>

 

You accidently switched the fuses? So? Why were you switching fuses to begin with? Switching fuses isn't going to cause a no-run situation.

Read the questions so we can help you.

 

There is nothing in there that states this is a continuance from a previous post. If you had another thread about this problem, why did you start a new one?

This is a vague as me saying "i pulled a wire of the thing in im engine compartment and now it doesnt run anymore. what was that wire for?" Either go back and post on your original thread, or put a little more info on this one so people know what your talking about.

 

888888888hey guys, when i jumper the connector i cant hear the fuel injectors anymore88888888888

Frankly speaking, that does not make a bit of sense. There's no plug that you can jumper and make the fuel injectors operate.

*********also i noticed that i accidentally switched the 2 fuses that i pulled to unflood the engine to the 40 on top and 30 on bottom, ****************

As long as neither fuse blew, then just put them back where they belong.

 

Hey! I am from California!

Anyways, I dont know of any way to tell if your injectors are firing, without pulling up the fuel lines, unless you get a stethoscope and listen while the engine is running.