injectors
#1
Senior Member
Thread Starter
Join Date: Jun 2001
Location: CANADA
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
injectors
Hey
im ready to buy my fuel system so far its a walbro 255 fuel pump, apex afc. i have a problem with the injectors though. my buddy wants all four of my 550 ccs.. and hes gonna get me a good deal on 4 Rc 780 cc injectors. will i run into problems with this setup?or would i be better off to just throw in 2 780 cc injectors? and what specific kind of injectors do i need? all i have is a turbo back rb exhaust and intake..
thanks again..
Ps im just in the process of getting my car back together.. sorry if too many questions..
im ready to buy my fuel system so far its a walbro 255 fuel pump, apex afc. i have a problem with the injectors though. my buddy wants all four of my 550 ccs.. and hes gonna get me a good deal on 4 Rc 780 cc injectors. will i run into problems with this setup?or would i be better off to just throw in 2 780 cc injectors? and what specific kind of injectors do i need? all i have is a turbo back rb exhaust and intake..
thanks again..
Ps im just in the process of getting my car back together.. sorry if too many questions..
#2
Rotary Enthusiast
Join Date: Feb 2001
Location: Right Here!
Posts: 898
Likes: 0
Received 0 Likes
on
0 Posts
87-88 TII's take low impedence injectors (top feed).
89-91 TII's take high impedence (top feed also)
I would keep the 550's in the primaries and put the 780's in the secondaries.
89-91 TII's take high impedence (top feed also)
I would keep the 550's in the primaries and put the 780's in the secondaries.
#4
On the topic of injectors
I have a NA-87. I am planning hevy mods and port down the road. what size injector should i get now before the port and haltech upgrade. Just some advice on size progression??/
thanx
thanx
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM