Injector wiring
10-04-21, 08:22 AM
#1
Rotatin'
Thread Starter
Injector wiring
Splicing in some new connectors for my primary and secondary injectors and a thought crossed my mind. Couldn't find the answer anywhere else on the forum so here we go.
Car is an S4 NA. These have the standard EV-1 connectors. There's 2 wires that go to the connector (what I assume to be positive and ground). Does it matter which pin on the injector gets powered and which one sees ground? Or is it that as long as the injector is seeing voltage across the pins, it'll fire?
Car is an S4 NA. These have the standard EV-1 connectors. There's 2 wires that go to the connector (what I assume to be positive and ground). Does it matter which pin on the injector gets powered and which one sees ground? Or is it that as long as the injector is seeing voltage across the pins, it'll fire?
10-04-21, 08:35 AM
#2
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,892
Received 2,639 Likes
on
1,869 Posts
you are correct, the black wire is power, and the other one goes to the ecu to be grounded.
the polarity doesn't matter, although you'll see that the harness is setup so every connector is the same, i guess just good tidy work.
the polarity doesn't matter, although you'll see that the harness is setup so every connector is the same, i guess just good tidy work.
10-04-21, 09:45 AM
#3
Rotatin'
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
Bryan Jacobs
2nd Generation Specific (1986-1992)
2
10-11-11 12:36 PM
