So I was putting the UIM back on my s5 tii. (after deleting emissions)When I got to the secondary injectors they didnt fit sung in the LIM. i went and looked at some s4 n/a injectors saw these rubber rings popped them off and they are to big for the s5 injectors. My question is are all usdm injectors the same size as in the same size mm? Anyone know where to get what I need? I thought about buying a denso seal kit.

 

All the injectors are the same external dimensions. Are the air bleeds still in the manifold? Without them the injector won't have anythin to seat into.

 

napa sells injector o-ring kits for our injectors. i think they are like 3 bux per injector? if your air bleeds are broken or missing as aaron stated, cj-motorsports sells replacement "seats". you remove the air bleeds and place these in the manifold

 

pintle caps broken or missing?

 

caps are on noting seems broken just no thick rubber o-ring. that being said if all injectors have the same dimensions y do the ones from my s4 n/a not work. :/ ill post pics tommarow.

 

Aaron... get off the 7club site and go post another update on youtube! I can only keep using the blast grit joke for so long!

 

Are you positive your current injectors are stock?

 

no, but they appear to be. not very big same color as supposed to come on an 89 same sort of notches and what not...in the back of my head i think they are jspec....it had a chipped n374 when i pulled everything out of the parts car...pics to come in a few hrs...def think i need those air bleeds

 

the part number for the bottom grommet is different S4 vs S5, so its very possible the S4 ones wont work in an S5....

 

yeah ima pick up a set of grommets..they must have been on them but idk what happened to them the primary ones are fine