So im going to upgrade my injector while im doing my rebuild and not sure what type to get.


Car: Turbo, street ported, turbonetics -t04b (gotta check the actual numbers), where at 16 psi, power fc


think id be okay with 720cc and 1600cc injectors. Also which one need the reisitor forgot low or high imp.

 

720/1600 should be fine. if using a powerfc you shouldnt need resistors.

 

sweet, but just so i can sve in my knowledge bank which type of injectors need the resistors

 

Low impedence injectors need ~6 ohm resistors. Aftermarket injectors are almost always low imp.