what all goes it the center iron to make the injector fit? please help

 

there should be a rubber grommet on the bottom of the injector and there are plastic air bleeders that go inside the iron, under the injector.

 

r the air bleeders atached to the injector?

 

no they are in the intake manifold

 

u mean the iron?

 

the air bleeders for the primary injectors are in the iron, the secondaries are in the LIM (for turbo models anyway, i think its the same for NA)

 

do u have to have them

 

they are

 

http://mazdatrix.com/c-6.htm

 

Thanks for all the help!!!!

 

For the record, all this info can be found in the FSM.

The Factory Service Manual can be found in the FAQ For FC thread. It contains all this information and more, and is an essential tool for any sort of service work that needs to be performed on these cars.

Additionally, the Haynes service manual for the 1986 thru 1991 RX-7 (both turbo and NA) can be found at most local auto parts stores or purchased from any good bookstore (ISBN number 1 56392 007 7). It is only about $25 and is a great quick reference for things like this. Not only does it contain most of the information in the FSM condensed into an easy to read format, but it includes full wiring diagrams as well.

These manuals will answer 99% of service related questions for the car and if you intend to do your own repair work, you will need at least one of them. Preferably both, since the FSM is a free download.

You also need a small phenolic spacer between the iron and the rail.

 

No. He means the intermediate housing. Iron my royal ***.

Wad's a eff essss emmmmm?