injecting injectors to my 88?
09-19-02, 08:01 PM
#1
Junior Member
Thread Starter
Join Date: Jun 2002
Location: Annpolis MD.
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
injecting injectors to my 88?
ok i know the whatever model "7" in 84-85 had 680 injectors...anyone know if its possible to shove those into my 88tII?
09-19-02, 08:18 PM
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
From MAZDATRIX..........Note: For higher fuel flow in an 86-87 1/2 Turbo or Non-Turbo, the 84-85 injectors may be substituted in
either the primary or secondary position (Not recommended in primary)
Your problem lies in that those 84-85 are low impedence injectors of 2-3 ohms. Your 88 has high impedence of 12ohms. You would have to go to Radio Shack and get some 10ohm 10watt resistors to go inline with the low impedence 84-85 injectors. Theres a couple of other ways to do it but thats it in a nutshell.
either the primary or secondary position (Not recommended in primary)
Your problem lies in that those 84-85 are low impedence injectors of 2-3 ohms. Your 88 has high impedence of 12ohms. You would have to go to Radio Shack and get some 10ohm 10watt resistors to go inline with the low impedence 84-85 injectors. Theres a couple of other ways to do it but thats it in a nutshell.
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM