indentify this wire for me?
#1
Rotary Enthusiast
Thread Starter
Join Date: Aug 2002
Location: MO
Posts: 850
Likes: 0
Received 0 Likes
on
0 Posts
indentify this wire for me?
it would take me a very long time to scour the FSM for this. can someone identify this for me?
its brown/black and it was bolted to the little intake thing that sits on top of the radiator shroud. it was bolted to plastic, not grounded, so im assuming thats not where its suppose to go, but id like to know what it is. thanks.
its brown/black and it was bolted to the little intake thing that sits on top of the radiator shroud. it was bolted to plastic, not grounded, so im assuming thats not where its suppose to go, but id like to know what it is. thanks.
#5
needs a cheaper hobby
iTrader: (4)
Join Date: Dec 2004
Location: Morgantown WV
Posts: 781
Likes: 0
Received 0 Likes
on
0 Posts
thats the coolant level sensor wire. it looks as though the sensor has been removed from your rad. its usually right beside the petcock (aka the filler neck).
if that wire is not making a good ground somewhere it will set off the buzzer, if it has'nt already been removed.
if that wire is not making a good ground somewhere it will set off the buzzer, if it has'nt already been removed.
#7
Former Moderator. RIP Icemark.
In the gauge cluster
Trending Topics
#8
Rotary Enthusiast
Thread Starter
Join Date: Aug 2002
Location: MO
Posts: 850
Likes: 0
Received 0 Likes
on
0 Posts
its just a bolt. the sensor isnt there. i got one on the way though. i took that wire off and my buzzer goes off now so i grounded it again until i get the sensor. thanks guys.
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM