im so excited!! dyno baby
#1
Up & Rising Star
Thread Starter
iTrader: (9)
Join Date: Jul 2009
Location: golden state
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
im so excited!! dyno baby
So finally after what seemed like forever I got my fc dyno'd!! Had to break it in and stuff, also had to get bigger wastegate which set me back a bit more. But after my wait, I reached a beautiful 354 hp to the wheels!!! Running 91 too!! Tomorrow ill post chart and pics and hopefully ill have the video showing final pull!! It was hard going to get my car while keeping my cool cause inside I was jumping up and down like a kid with a shopping spree at toyz r us.
#3
Up & Rising Star
Thread Starter
iTrader: (9)
Join Date: Jul 2009
Location: golden state
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Not detailed mods, but u can see some pics in my gallery, gonna be adding more within the next few dayz. I did. A lot and it wasn't cheap, as it had to be done right, turbo and wastegate alone 2k, ct 361 and synapse 50mm. And an engine and computer to match. I wanna make a video, but gonna have to exclude the interior as I haven't really worked too much on that, lol,
#7
Up & Rising Star
Thread Starter
iTrader: (9)
Join Date: Jul 2009
Location: golden state
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Thanks eddie, as well as everyone else who helped me get this far. NOW, here is my dyno vid along with the slip, i'm gonna make a nice video collection of my rx7 so in a few days ill have that posted as well.
so here is the video, i know its kinda dark, im hoping i will be able to lighten it up in my editing program, 11lbs of boost
<object width="480" height="385"><param name="movie" value="http://www.youtube-nocookie.com/v/ePD5R-egp04?fs=1&hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube-nocookie.com/v/ePD5R-egp04?fs=1&hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
and a few pics
while i donr feel like going over all my mods, as i would miss a few anyways, heres a shot of my engine bay
and my haltech, the small little thing it is
so here is the video, i know its kinda dark, im hoping i will be able to lighten it up in my editing program, 11lbs of boost
<object width="480" height="385"><param name="movie" value="http://www.youtube-nocookie.com/v/ePD5R-egp04?fs=1&hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube-nocookie.com/v/ePD5R-egp04?fs=1&hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
and a few pics
while i donr feel like going over all my mods, as i would miss a few anyways, heres a shot of my engine bay
and my haltech, the small little thing it is
Trending Topics
#9
Up & Rising Star
Thread Starter
iTrader: (9)
Join Date: Jul 2009
Location: golden state
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
large street ports, ct 361 turbo, and yes the dyno sheet is for 11 psi pull, as currently i have a s4 alternator that doesnt supply enough power to my setup, i need a s5 as it has twice the amps. So due to this lack of amps, at 7k rpms, my denso fuel pump began to lose voltage so i couldnt go higher on boost, nor could i take it past 7k, however i have gotten a s5 alternator, and i plan on doing the dyno again in 2-3months time. got some other stuff i wanna take care of first.
#13
Up & Rising Star
Thread Starter
iTrader: (9)
Join Date: Jul 2009
Location: golden state
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
Also the rebuild and all motor work was done by lucky 7 racing in duarte, tuned by nelson. Just thought everyone should know who was responsible for building this.