If bypassing injectors resistors can stock injectors still be used
Joined: Mar 2001
Posts: 31,837
Likes: 3,234
From: https://www2.mazda.com/en/100th/
so there are two setups, both setups give the ecu about 12ohms of resistance.
the 86-87.5 setup is low impedance injectors (purple?), ~2ohms and the resistor 10ohms = 12ohms
the 87.5-88 setup is high impedance injectors (red?), 12ohms and no resistor = 12ohms
as long as you end up with 12 ohms of resistance its fine.
and an 88 should not have a resistor pack, if its still the factory setup
the 86-87.5 setup is low impedance injectors (purple?), ~2ohms and the resistor 10ohms = 12ohms
the 87.5-88 setup is high impedance injectors (red?), 12ohms and no resistor = 12ohms
as long as you end up with 12 ohms of resistance its fine.
and an 88 should not have a resistor pack, if its still the factory setup
Joined: Jul 2013
Posts: 2,596
Likes: 799
From: █▬█ █▄█ █▬█ █▄██▬█ █▄█ █▬█ █▄█
Thread
Thread Starter
Forum
Replies
Last Post
Gryffinwings
2nd Generation Specific (1986-1992)
27
Nov 20, 2017 03:50 PM
aceofspades49c
2nd Generation Specific (1986-1992)
3
Nov 15, 2007 07:15 PM