2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Idle Problems

Thread Tools
 
Search this Thread
 
Old Jan 15, 2005 | 11:17 AM
  #1  
my-sons rx7's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
 
Joined: Sep 2003
Posts: 423
Likes: 0
From: Syracuse New York
Idle Problems

I search but i could not fine the answer I just got the car a 87 T2. car idle @ 1600-1800 rpm cold or hot dosn't change. The kid i the car from said, after engine warms up the idle would sometime fluctuate up & down. but i haven't seen it yet the car not on the road, he said it mite be the thermalwax or tps. what is the thermalwax & were is it located. Any help on solving my idle problem would be greatly appreciate Thanks Tony
Reply
Old Jan 15, 2005 | 12:58 PM
  #2  
nlc1179's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Oct 2002
Posts: 451
Likes: 0
From: Columbus, OH
have you checked to see if the trottle plates have been sticking?
Reply
Old Jan 15, 2005 | 01:29 PM
  #3  
1.3power's Avatar
Super-Tuner
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 84
Likes: 0
From: Littleton, Colorado
there is a little screw that the throttle plate rests on and if that is screwed in to far it will increase the idle. also the thermal wax thing is a little wax pellet that increases idle when cold and then it melts when it heats up. i just took mine out. makes it hareder to start when cold but i like it better.
Reply
Old Jan 15, 2005 | 06:48 PM
  #4  
my-sons rx7's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
 
Joined: Sep 2003
Posts: 423
Likes: 0
From: Syracuse New York
Originally Posted by 1.3power
there is a little screw that the throttle plate rests on and if that is screwed in to far it will increase the idle. also the thermal wax thing is a little wax pellet that increases idle when cold and then it melts when it heats up. i just took mine out. makes it hareder to start when cold but i like it better.
Where is the thermal wax located
Reply
Old Jan 16, 2005 | 11:19 AM
  #5  
my-sons rx7's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
 
Joined: Sep 2003
Posts: 423
Likes: 0
From: Syracuse New York
When i first start the car it idle @ 1100 rpm as the car warms up the idle jumps up to anyware between 1600-1900 rpm an stay there any tips. It's kind of cold out side about 15, so not much i can do right now just looking for some tips so when it gets alittle warmer out i can work on it. Thanks Tony
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
Nov 21, 2020 09:34 AM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
firzen
2nd Generation Specific (1986-1992)
9
Sep 15, 2015 12:04 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
Sep 2, 2015 02:11 PM




All times are GMT -5. The time now is 10:06 AM.