I'm a little new with the Rx7, I have owned my first Fc3s for 3 months now. It starts up and idles at 2000 rpm t5hen when its warm it will either die or the idle will flutter between like 550 and 900. Can any one help me. I havent touched anything yet to try and fix it?
My Rx7 is a 1988 GXL non turbo, manual, 13b.
Oh also looking to buy a turbo 13b engine with turbo and trans if you have any suggestions. I building the car for drift only its not going to be a daily driver. I want it to run with engine it has now so we can do some drift passes to learn a little a more on our suspension set up.
Thanks

 

I would guess that you need to set the timing on your DRIFT car. Also get ahold of a factory FSM and that will give you the procedure. Welcome to the club

 

adjust TPS

 

buy a Haynes manual at an autoparts store - read it

use the "search" function

 

Hey thanks guys that was an easy fix runs fine now. I read alot of threads before I asked that question but wanted to double check before I started doing any thing.

 

dam i have the same problems.... i already did set the timing to specs but when i do that tha engine just doesnt respond as well as the time setting it had before....any ideas?