Idle Hunting
#1
Full Member
Thread Starter
Join Date: Aug 2003
Location: Vancouver
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Idle Hunting
Ive done a search but didnt come up w/ a answer to my problems. ... so ive decided to make a post
The cable connecting to the gas pedal and the turning thing inside the engine bay came off its 'tracks' and ivebeen running w/ about 2inchs of gas pedal response for bout 3 months.
Yesterday I fixed the cable and put it back on the track.. but immediated the idle raised to 1500 and when its in N the idle started jumping... it happens regardless of warm/cold ... but when in gear the problem is just high idle
the screw on the tps cant turn any more ... is there and explanation for this ? everything was running at 750 warm when the cable was off the tracks ... i dont understand
any help out there ? thanks
The cable connecting to the gas pedal and the turning thing inside the engine bay came off its 'tracks' and ivebeen running w/ about 2inchs of gas pedal response for bout 3 months.
Yesterday I fixed the cable and put it back on the track.. but immediated the idle raised to 1500 and when its in N the idle started jumping... it happens regardless of warm/cold ... but when in gear the problem is just high idle
the screw on the tps cant turn any more ... is there and explanation for this ? everything was running at 750 warm when the cable was off the tracks ... i dont understand
any help out there ? thanks
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM