idle
#1
Junior Member
Thread Starter
Join Date: Dec 2002
Location: coral springs florida
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
idle
what does a 2nd gen 13b idle when its 80 degrees out
i have adjusted the tps evertime i work on it ( it keeps changing o well)
anyways when im adjusting in ill get it to idle at 1500
can people post pics of there tps and the little screw above it that controls idle and the secondary one i guess u call it
im tired of adjusting this bitch
i have adjusted the tps evertime i work on it ( it keeps changing o well)
anyways when im adjusting in ill get it to idle at 1500
can people post pics of there tps and the little screw above it that controls idle and the secondary one i guess u call it
im tired of adjusting this bitch
#2
Full Member
Join Date: Feb 2003
Location: Austin, TX
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
It should idle at 750 normally. If you have the BAC off (a/c present), then it should be set at 1000+. There are pics in the webpage below.
http://fc3s-pro.com/TECH/HOWTO/TPS/tps.html
Hope it's ok to link Reted's site. =)
http://fc3s-pro.com/TECH/HOWTO/TPS/tps.html
Hope it's ok to link Reted's site. =)
#3
Rotary Enthusiast
Join Date: Jan 2002
Location: Australia
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by GlenL
http://fc3s-pro.com/TECH/HOWTO/TPS/tps.html
Hope it's ok to link Reted's site. =)
http://fc3s-pro.com/TECH/HOWTO/TPS/tps.html
Hope it's ok to link Reted's site. =)
The forum didn't have a problem with him. He had a problem with some of the people on the forum (he does still post, but not in the 2nd gen forum).
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM