krazie2insane

the starter is no good so i am pop starting it to try and break the engine loose well i broke the engine loose and the engine spins freely but nothing its like it dont even wanna try and start can anyone help me when i let out the clutch it pulls like normal but its like it aint getting any fire

Icemark

Sorry your message is hard to understand.

so the starter is not cranking and the car doesn't run?

krazie2insane

yesw the starter bolt is stripped so i cant get it down to replace the starter slyanode so i ve been trying to pull start it with a car the motor turns but its like it aitn getting any spark

drake696

check the spark take out a lspark pklug ground it where the threads are and try cranking it to see if u got spark is not see if ur getting fuel if ur getting fuel and spark then check to se if ur fuel injectors are working propperly

Icemark

Sure you didn't just flood it?

HAILERS

Sounds like he had carbon lock, the starter was non functional, and he decided to push, pull or drag the car to break the frozen engine loose. It sounds like he did break the engine loose but the pig won't ignite and run while pulling, pushing and shoving the car. The starter is still a bum **** starter, the way I understand it. I say fix the starter. Grind the bolt head off if it won't come out and your half way there. Don't ask how to get the rest of the bolt out.

ianbell

If you want help, can you make some effort to post in English?

Scott 89t2

was the key "on" when you where pushing it?? just asking... also if the starter is broken but still there. it might be stoping the flywheel from spinning.

krazie2insane

yes the key was on and i tried poping it at about 30 in 3rd and thats how i broke the engine loose i think that the starter clyinode is bad i have to take the whole starter off to get to it dont i