rx7joe

iTrader: (10)

I am converting my 88 GXL's guage cluster to that of a 89+ set. I understand that the pin order on the circular connectors are different. If someone with an 89+ workshop manual could either tell me the pins and what wires are designated for each or scan the wiring diagram (including the connector diagrams) page for the main guage cluster, I would really appretiate it. Email me at rx-7joe@rcn.com with the scanned image so I don't have to download it everytime I need to look at it.

rx7joe

iTrader: (10)

ANYBODY?!?......

deadRX7Conv

I have a '91 Factory service book.
Sorry, I have no scanner(still waiting for after Christmas sales).
I can meet anyone at any Rhode Island public library/college library.
I usually spend at least one Sat or Sunday each month doing homework/research.

I will be busy until after newyears.
Let me know if you would like to Xerox it or bring laptop/scanner to the library.

If anyone would like to copy it(not borrow) email me at donutz28@hotmail.com and I'll let you know when I am at the library.

rx7joe

iTrader: (10)

Would you be able to copy it and send it to me? It's hard for me to get out and as my guage cluster is inoperative untill I get the 89+ one in I don't want to go much further than around town etc. I can send you money for the copy and stamp if you need. Let me know.

Thanks

deadRX7Conv

I am going to scan images at friends house. But, it will not be until monday or right after new years. I have child visitation(7yearoldbrat home from school) and will not be able to touch computer until after the weekend.
I hope that you are not in a hurry.

rx7joe

iTrader: (10)

That's fine....Just send it to my email address instead of posting it here.

Mike Dodson

Hey Greg,
I have both a 90 and 91 manual. I can scan and send in PDF format to you. Give me a little more info on exactly what you want and I'll try and get it to you tommorow some time.
Later,
MikeHome EMail

rx7joe

iTrader: (10)

Here's exactly what I need. It is the instrument cluster (to include tach, speedo, coolant temp,etc.) wiring diagram for the N/A model, NOT Turbo. It needs to include both the wiring diagram and especially the connector diagrams which should be at the bottom of the wiring diagram. I do not need the page next to it that points out where the connectors are located in the car. I'm not sure the page numbers as I don't have the book.

Thanks

Greg

Mike Dodson

Hey Greg,
Hope this is what you need. If I need to send to your email, let me know

Mike Dodson

Hey Greg,
Emailed you PDF file.