I need a RX7 know it all for this one!
Originally Posted by Terrh
you don't need a fog machine to test for vacuum leaks. Just ears and an air compressor.
Pressure test the intake. Whereever air leaks out fix it until it dosen't. No other method of checking for vacuum leaks works as well as this.
Have you checked/set the TPS to be somewhere near where it should be at?
Are you SURE there are no air leaks in the AFM piping and etc?
Have you managed to get the engine warm yet?
Have you checked the timing since you got it started, have you checked it properly?
it shouldn't just "die" below 2000rpm unless there is a major vacuum leak or other big issue.
Pressure test the intake. Whereever air leaks out fix it until it dosen't. No other method of checking for vacuum leaks works as well as this.
Have you checked/set the TPS to be somewhere near where it should be at?
Are you SURE there are no air leaks in the AFM piping and etc?
Have you managed to get the engine warm yet?
Have you checked the timing since you got it started, have you checked it properly?
it shouldn't just "die" below 2000rpm unless there is a major vacuum leak or other big issue.
Thread Starter
Sleeper that sleeps
Joined: Sep 2004
Posts: 51
Likes: 0
From: springfield, IL
i think that i found the problem is that a lead coil is bad...
can anyone find the ohm's for a leading coil where you plug in the plugs, on the coil. not the little bolts, i cant find it in my FSM.
THANKS A MILLION GUYS!!!!!
can anyone find the ohm's for a leading coil where you plug in the plugs, on the coil. not the little bolts, i cant find it in my FSM.
THANKS A MILLION GUYS!!!!!
Thread Starter
Sleeper that sleeps
Joined: Sep 2004
Posts: 51
Likes: 0
From: springfield, IL
now that i know what the problem was
EVERYONE LISTEN if you check every inch of a rebuild and you dont know what is wrong HAVE SOMEONE ELSE L@@K IT over and double check your work!!!!!
i feel really dumb but ill feel even dumber when i get the new coil tomorrow and it not the problem...
ill get back to you all 3.4.2006
<-- that one is KOOL!
EVERYONE LISTEN if you check every inch of a rebuild and you dont know what is wrong HAVE SOMEONE ELSE L@@K IT over and double check your work!!!!!
i feel really dumb but ill feel even dumber when i get the new coil tomorrow and it not the problem...
ill get back to you all 3.4.2006
<-- that one is KOOL!
Thread Starter
Sleeper that sleeps
Joined: Sep 2004
Posts: 51
Likes: 0
From: springfield, IL
ok so i have a NEW leading coil for my 88 and now i dont get spark
i get 12v to the coil when it is plugged in and when i unplug the BY connector i only get 7.45v before cranking and 5.5v when cranking?
someone PLZ help!!!!
i get 12v to the coil when it is plugged in and when i unplug the BY connector i only get 7.45v before cranking and 5.5v when cranking?
someone PLZ help!!!!
Thread
Thread Starter
Forum
Replies
Last Post
