Last night I smelled fuel. to today I wanted to fix it .
It is the input line that feeds the secondary injector fuel rail. The one located next to the firewall. I don't know where the other end is. Can I change this with out removing the manifold. I can't see where it goes
I need to drive to my mothers tonight or tomorrow, but none of the parts stores wil be open tomorrow. I need the don'e tonight.

Please help!!!

 

so you can see that the hose is leaking??

 

Yes there was fuel running from it. so I started to take it off and now I can't find the other end. I had to cut a slit down the side too so I could get it off the nipple. so now I have no car

 

Hmm you are going to have to remove partly the upper take and work that way. Sounds more like it could be the pulsation damperner.

C

 

You're SOL. Go buy a new car.

 

It ain't quite that bad Wicked7

But, you're going to have to pull the upper manifold. Sorry, not enough room there to get at the hose without it.

PaulC

 

well the damperner is on the front. and he said it was the line by the firewall that was leaking. you need to remove the upper manifold. you'll need a new intake gasket after too.