i fried my computer and my wire harnesses got a few questions
#1
Junior Member
Thread Starter
Join Date: Mar 2008
Location: nebraska
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
i fried my computer and my wire harnesses got a few questions
About a month ago my computer and my wire harness burned up in my 87 non turbo. i bought a turbo 2 computer and wire harness, turbo with manifold, blow off valve, and the intercooler. it cost me a little over 700.00. all i need to know is will it work if i put it all in. or is there something i am missing
#2
Marvelous Hedonist
Join Date: Oct 2007
Location: Old-Town BrightTown, CO
Posts: 761
Likes: 0
Received 0 Likes
on
0 Posts
What caused the computer and wiring harness to "burn up" ? Whether or not the parts you purchaced will work depends on specifics. Is everything you purchaced the exact same as what was destroyed?...same numbers on the computer, all S4..etc.?
#3
Junior Member
Thread Starter
Join Date: Mar 2008
Location: nebraska
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
no they wernt the exact same. i am making my nt a t2. my car is an 87, the computer and harnesses are also from an 87 the only difference is that my car is a nt and the stuff i bought is for a t2
#4
(_8(|)
Join Date: Jul 2004
Location: Manhattan, Kansas
Posts: 2,034
Likes: 0
Received 0 Likes
on
0 Posts
You cant just swap on that stuff. You need to look into a t2 conversion thread....you need to supply the turbo with oil and water, what are your pans for doing that? What about fuel? The stock NA system wont be enough to support a turbocharger. There are so many more loose ends in a t2 swap. Don't mean to sound like a dick......but do some research and then get back with serious inquiries.
#5
Junior Member
Thread Starter
Join Date: Mar 2008
Location: nebraska
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
ill worry about the the fuel and oil lines im not worried about that i have a mechanic that will worry about that i just want to know if the car will run with the t2 computer. thats it
#6
Marvelous Hedonist
Join Date: Oct 2007
Location: Old-Town BrightTown, CO
Posts: 761
Likes: 0
Received 0 Likes
on
0 Posts
Well, heres a couple good links to let you know what your in for if you decide to continue with your project. Its not impossible..
http://www.aaroncake.net/rx-7/naturbo.htm
http://www.aaroncake.net/rx-7/projecttina/index.html
http://www.aaroncake.net/rx-7/naturbo.htm
http://www.aaroncake.net/rx-7/projecttina/index.html
Last edited by DavidHolmesIII; 03-28-08 at 03:30 AM.
#7
Lives on the Forum
Yep, you still need...
The rest of the engine
The rest of the intake manifolds
The throttle body
The Turbo II transmission
The Turbo II driveshaft
The Turbo II rear diff
The Turbo II rear axles
Bigger fuel pump
The Turbo II hood
-Ted
The rest of the engine
The rest of the intake manifolds
The throttle body
The Turbo II transmission
The Turbo II driveshaft
The Turbo II rear diff
The Turbo II rear axles
Bigger fuel pump
The Turbo II hood
-Ted
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM