tIIsleeper

How much wheel horsepower do you think an 87 t2 has with the following:

Turbo23

iTrader: (4)

240-250hp

tIIsleeper

That would be at the flywheel right?

Turbo23

iTrader: (4)

well also depends on boost your seeing. But a good running t2 with those mods should see 240-250

tIIsleeper

Im running 12 pounds of boost.

gingenhagen

uh....fuel?

tIIsleeper

What do you mean, octane? If so, 93.

Turbo23

iTrader: (4)

like you should be running a walbro fuel pump, U should be ok with stock injectors, but thats pushing it. Also you might want a apex safc or something to give it alittle more fuel

tIIsleeper

Actually its running rich right now. Not sure if its getting enough fuel in higher rpms. Any more whp guesses?

eage8

iTrader: (9)

flywheel I would guess like 240, rwhp I would guess 190-200?

Jager

iTrader: (10)

Exactly, I also say you are starving for fuel. Go buy some GSL-SE injectors or 720ccs, and a Rtek.

TII-aholic

i made 205 when i had those mods on a mustang dyno @11-12 psi.

J-Rat

iTrader: (2)

12 PSI, no fuel mods eh? Better put Kevin on speed dial.

Jager

iTrader: (10)

I forgot to mention a Walbro or rx7.com fuel pump. You might want to take down the boost right away.

Bukwild

how are you monitoring boost? Do you have a aftermarket guage? Stock guage is not going to give you proper readings.

"Keep Kevins phone number on speed dial"

That sounds all to much like me.....

iceblue

LOL J-Rat you took the words out of my mouth and made them bettor :-D

tIIsleeper - Dood I thought you car wasent even runing right? Yea your probably around 200 at wheels

Turbo23 - An SAFC can not add fuel it can only pull back the duty cycle.

tIIsleeper

Yes, I have an aftermarket boost guage. Its running like ***** right now, it hesitates between 2 and three grand only in gear. I dont know whats wrong, and the engines blown. Rear rotor reads 35 psi and the front is at 60. Three days ago I drove it and it pulled nice and it didnt hesitate or buck at all. Now its doing it.