How to install individual rear camber adjusters?
How to install individual rear camber adjusters?
I got some of these from MMR. What way do they go in?
There's basically a block with a hole on one side, a spherical bearing with a lock washer + spacer. Then on the side of the block there's another hole with a spacer on one side, then a small spacer + larger spacer.
Anyone have pics of this? That would be appreciated much.
There's basically a block with a hole on one side, a spherical bearing with a lock washer + spacer. Then on the side of the block there's another hole with a spacer on one side, then a small spacer + larger spacer.
Anyone have pics of this? That would be appreciated much.
I believe he is asking how these are oriented when installed, which the MT website won't have.
U could have just emailed MMR like I did when I got them
U could have just emailed MMR like I did when I got them
Originally Posted by MMR
The solid part of the camber adjuster attaches to the subframe and the spherical rod end attaches to the control arm. The thick spacers go toward the center of the car.
That's what I ended up going. They basically told me the same thing. Got everything in + after 3 months got my car back together. Forgot my pinion snubber though. Oh well.
Thread
Thread Starter
Forum
Replies
Last Post
88, adjuster, adjusters, adjustment, adjustors, camber, individual, install, installation, installing, mazda, mmr, plates, rear, rx7
