RX7Club.com - Mazda RX7 Forum - How to install individual rear camber adjusters?

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)

- - How to install individual rear camber adjusters? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/how-install-individual-rear-camber-adjusters-866002/)

incubuseva

09-29-09 07:28 PM

How to install individual rear camber adjusters?

I got some of these from MMR. What way do they go in?

There's basically a block with a hole on one side, a spherical bearing with a lock washer + spacer. Then on the side of the block there's another hole with a spacer on one side, then a small spacer + larger spacer.

Anyone have pics of this? That would be appreciated much.

HOZZMANRX7

09-29-09 11:45 PM

Mazdatrix web site has a complete how to install for these.

incubuseva

09-30-09 12:31 AM

Thanks hozzman.

HotRodMex

10-02-09 11:56 PM

I believe he is asking how these are oriented when installed, which the MT website won't have.

U could have just emailed MMR like I did when I got them

Quote:

Originally Posted by MMR

The solid part of the camber adjuster attaches to the subframe and the spherical rod end attaches to the control arm. The thick spacers go toward the center of the car.

incubuseva

10-03-09 12:27 AM

That's what I ended up going. They basically told me the same thing. Got everything in + after 3 months got my car back together. Forgot my pinion snubber though. Oh well.

All times are GMT -5. The time now is 08:57 PM.