How to get this thing going??????
07-27-02, 01:46 AM
#1
Passenger
Posts: n/a
How to get this thing going??????
Well i have one tII but there is another on the way, the only thing is that it has been sitting in a feild for a bout a year or so, So what would i need to do to get this thing going again, its in great shape and a great deal so what would i need to get it running?
07-27-02, 06:04 PM
#3
Junior Member
Join Date: May 2001
Location: Edmonton, Alberta, Canada
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
first off whats wrong with it.
second when rotary motors sit for a long period of time without getting stored properly supposidly something warps and the engine gets messed up. so make sure its got good compression on it.
second when rotary motors sit for a long period of time without getting stored properly supposidly something warps and the engine gets messed up. so make sure its got good compression on it.
07-27-02, 08:41 PM
#4
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Pull the leading plugs and dump a few ounces of oil into each chamber. Now rotate the engine a few turns by hand and put the plugs back in. Drain old gas and fill up tank with good new gas. Prime the fuel system (use test jumper....yellow plug on passenger shock tower). Change the coolant. Change the oil. Start her up.
07-27-02, 09:07 PM
#5
Junior Member
Join Date: Jul 2002
Location: lancaster,england
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
As above plugs out, oil squirted in and turned by hand till sound from plug is 'swooshing' of lubed tips then pull ignition fuse and turn on starter with fresh battery for 5 secs say to prime oil. started one stood 3 years as above and fired as soon as ignition fuse back in. may help to 'prime' with easy start or similar but not too much or floods, see one of many forums on flooding if so, wet plugs etc. dont like starting by pulling car till really necessary, try and let car start of own accord less chance of breaking.
dont be afraid of the car!!
seymour
dont be afraid of the car!!
seymour
07-27-02, 10:29 PM
#6
boost on the way(GTU II)
dont be afraid of the car just be veeeeeeerrrry afraid of the car !! rx7= high maintenance ( very high maintenance if car is high mileaged ) after u start up regularly change the oil /plugs check all fluids
i mean ALL fluids!
jus my opinion dont listen to me!
jack
i mean ALL fluids!
jus my opinion dont listen to me!
jack
07-27-02, 10:44 PM
#7
1JZ powered
Join Date: Jul 2001
Location: Where there's only two seasons, hot and wet! I love Okinawa
Posts: 4,423
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by seventhgear
dont be afraid of the car just be veeeeeeerrrry afraid of the car !! rx7= high maintenance ( very high maintenance if car is high mileaged ) after u start up regularly change the oil /plugs check all fluids
i mean ALL fluids!
jus my opinion dont listen to me!
jack
dont be afraid of the car just be veeeeeeerrrry afraid of the car !! rx7= high maintenance ( very high maintenance if car is high mileaged ) after u start up regularly change the oil /plugs check all fluids
i mean ALL fluids!
jus my opinion dont listen to me!
jack
Trending Topics
07-30-02, 03:41 PM
#13
Passenger
Posts: n/a
Well went and looked at the car for the first time today, Its in decent shape, a little dent in the hood, old paint, but hey its still a TII. Its got 130k miles on it, so a rebuilt street port will follow soon. But hopefully it will work out ok for now. Its a 7/86 y ear model. But hey its gonna kick ***......
Thanks for the help again>
Later
-Chris
Thanks for the help again>
Later
-Chris
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Tem120
3rd Generation Specific (1993-2002)
4
09-07-15 09:53 AM