2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

hot/cold start issue! plz help

Thread Tools
 
Search this Thread
 
Old Jun 24, 2006 | 04:59 AM
  #1  
nwdrifter's Avatar
Thread Starter
Full Member
Tenured Member 20 Years
 
Joined: Sep 2003
Posts: 133
Likes: 0
From: seattle, wa
hot/cold start issue! plz help

86 rx7 did compression test and got 100psi off the front and 80 in the rear recently replaced the inj orings and bushings and had them all cleaned and tested i also know its not a floodding problem battery is good spark plugs and wires recently replaced basically when i start up "cold start" it takes 1-3 tries and starts right up foot has to be on the gas to start. on hot starts i have to wait approx 15-20mins to hot start it... please tell me how to fix this or what else i can do!

inj orings replaced
injectors cleaned
battery checked
spark plugs
spark plug wires
flooding
comp tested

Last edited by nwdrifter; Jun 24, 2006 at 05:01 AM.
Reply
Old Jun 24, 2006 | 05:01 PM
  #2  
boost_its_what_for_dinner's Avatar
RotoriousRx7
Tenured Member 05 Years
 
Joined: Oct 2005
Posts: 1,236
Likes: 0
From: goodlettsville,tennessee 37072
i have the same problem but only on hot starts and when hot i have to floor it and crank it for a few seconds and it seems like it needs to build compression to fire up or like the spark just isnt there
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
Microtech
30
Apr 23, 2016 06:37 PM
1993fd3sracer1
3rd Generation Specific (1993-2002)
29
Oct 13, 2015 01:57 PM
1993fd3sracer1
1st Generation Specific (1979-1985)
20
Sep 7, 2015 11:50 AM
FB_Frank85
1st Generation Specific (1979-1985)
6
Aug 31, 2015 03:31 AM
befarrer
2nd Generation Specific (1986-1992)
4
Aug 14, 2015 04:18 PM




All times are GMT -5. The time now is 08:14 PM.