2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

hks seq

Thread Tools
 
Search this Thread
 
Old 10-20-09, 11:17 PM
  #1  
oi oi oi

Thread Starter
iTrader: (7)
 
john ward's Avatar
 
Join Date: Jan 2006
Location: wilmot,oh
Posts: 611
Likes: 0
Received 1 Like on 1 Post
hks seq

I have recently reinstalled a hks sequential bov along with new injectors and wired up an ltx-8. While trying to tune i hear a weird screeching noise right about 3 inches of vacuum all the way till i stop at 12 psi. Bov was functioning fine last time i had it installed even thought it was 3 years ago and lets air out just fine when i let off throttle. Am i right in thinking its the bov or am i overlooking something i should check before spending up to 400 on a new one. No leaks at vacuum at all and never had any noise before. The new injectors are rc 750's and the bottom of injector was way different and i only used the o ring. was this wrong. Any help would be great. And i pressure checked the bov with compressed air with and without vacuum appliied to nipple never had any leaks. thanks
Old 10-21-09, 07:20 PM
  #2  
oi oi oi

Thread Starter
iTrader: (7)
 
john ward's Avatar
 
Join Date: Jan 2006
Location: wilmot,oh
Posts: 611
Likes: 0
Received 1 Like on 1 Post
well its not the bov. I replaced with piece of pipe without bov for a quick drive and the same noise. Its not the cheap advanced cone air filter. its quite a loud wooshing noise. I had a product called the engine ear hooked up all over engine compartment and cant find. If you dont know what that is its a wireless tool with varios sensors and headphone to find noises. Any new ideas would be great
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM



Quick Reply: hks seq



All times are GMT -5. The time now is 01:59 AM.