high beams
01-07-11, 06:46 PM
#1
Stick & Slide #007
Thread Starter
Join Date: Mar 2009
Location: oakwood ga.
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
high beams
ok im confused my high beams havent worked sense i got the car i got a s5 vert and i was wondering if high beams was a option and not standerd its weird
01-07-11, 07:01 PM
#3
Do this. With the pop up lights down, pull and hold the turn signal lever to activate the high beams. Do you see the lights flashing through the flash to pass lenses?
If yes, the CPU board is bad and needs to be replaced. Mazdatrix sells a new board. Will also fix bad factory alarm and some interior lighting.
Before anyone tries correct me, this only applies to S5 Convertible WITH airbag option (all of them as far as I know). This does not apply to coupes as the wiring is different.
If yes, the CPU board is bad and needs to be replaced. Mazdatrix sells a new board. Will also fix bad factory alarm and some interior lighting.
Before anyone tries correct me, this only applies to S5 Convertible WITH airbag option (all of them as far as I know). This does not apply to coupes as the wiring is different.
01-07-11, 09:36 PM
#4
Driving RX7's since 1979
iTrader: (43)
Join Date: Aug 2001
Location: So Cal where the OC/LA/SB counties meet
Posts: 6,096
Likes: 0
Received 8 Likes
on
8 Posts
To add, I had the exact problem.
How could BOTH high beams be bad at the same time?
Answer, they were both bad at the same time. Go figure.
Replaced both, all good.
How could BOTH high beams be bad at the same time?
Answer, they were both bad at the same time. Go figure.
Replaced both, all good.
Thread
Thread Starter
Forum
Replies
Last Post
joel(PA)
Group Buy & Product Dev. FD RX-7
8
10-04-15 06:07 PM
