2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

hey all! new rotorhead w/ ?'s. Idle problems

Thread Tools
 
Search this Thread
 
Old Mar 8, 2004 | 10:50 PM
  #1  
rotoboy20's Avatar
Thread Starter
Im Ron Burgandy..
Tenured Member 05 Years
 
Joined: Mar 2004
Posts: 329
Likes: 0
From: Greenville, South Carolina
Smile hey all! new rotorhead w/ ?'s

hi fellow rotorheads!
iv wanted one of these things for sooooo long now, and i finaly have one! its a red 1987 gsl 5 speed w/ 14 in alloys. i picked it up from this dude who had taken pretty good care of it(3rd owner, never smoked in, reg oil changes, ect...) i am however reaping the bennifits of his poor judgment in tampering with the adjustment screws on the throttle body. it also consumed a half a quart of oil in about 300 miles, but it doesnt show the telltail signs of exessive oil consumption.

i did go as far a purchacing a hanes repair manual from auto zone, but the trouble shooting catagorys have so many answers as to what may be the problem and hardly any procedures on how to actually trouble shoot the system.

here are the other problems i am having.

hi idle 1200rpm and fluxuates sometimes up to 3500 rpm

extreemly low and rough idle between 450 and 850 rpm but does not stall.

during the hi idle senario "after burn" is 1-2 poping sounds per second but in low idle senario after burn is quite frequent.

and sometimes it will idle at a constant 1100 rpm with minimal after burn and runs very smoothly.

today i noticed another nagging concern, in 3rd gear under heavy acceleration there seemed to be a hesitation or a flat line in the torque curve around 3500 to 4000 rpm

i wont even list the problems im having with the transmission, lets just say its a little noisy!

well i hope some one can help me. if you havnt read my profile then i shall reitterate that i am educated in the automotive field and i have a pretty good grasp on how these things(the wonderful toys that they are)operate, i just dont know that much about fixing ones problems....YET!!! though im will and eager to learn!!

thanx!!!
chris
Reply
Old Mar 8, 2004 | 10:53 PM
  #2  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Title of thread updated to better reflect question
Reply
Old Mar 8, 2004 | 11:23 PM
  #3  
rotoboy20's Avatar
Thread Starter
Im Ron Burgandy..
Tenured Member 05 Years
 
Joined: Mar 2004
Posts: 329
Likes: 0
From: Greenville, South Carolina
huh???? elaborate Mr. aloof
Reply
Old Mar 9, 2004 | 01:05 AM
  #4  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Originally posted by rotoboy20
huh???? elaborate Mr. aloof
Your title of the thread did not describe the problem, so I updated it, to actually include the problem.

If you include the problem in the title, you will get helped much quicker as people tend to ignore threads with generic titles like "Hi", or "New ..."
Reply
Old Mar 9, 2004 | 06:35 PM
  #5  
rotoboy20's Avatar
Thread Starter
Im Ron Burgandy..
Tenured Member 05 Years
 
Joined: Mar 2004
Posts: 329
Likes: 0
From: Greenville, South Carolina
AHH! INDEED! ok sorry bout that. anywho...where did it go to. which catagory i mean..
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
R7rexy
3rd Generation Specific (1993-2002)
19
Sep 2, 2015 10:24 AM
Kruel13
1st Generation Specific (1979-1985)
10
Aug 26, 2015 12:17 PM
FB_Frank85
1st Generation Specific (1979-1985)
5
Aug 24, 2015 09:59 AM




All times are GMT -5. The time now is 10:15 PM.