2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

hesitation problem

Thread Tools
 
Search this Thread
 
Old Dec 28, 2002 | 01:19 AM
  #1  
rx-7fc's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 865
Likes: 0
From: oakland Ca
hesitation problem

i have a 86 gxl it starts to hesitate around 4500rpm and up until i get to redline what might that be it just start doing that today but only sometimes
Reply
Old Dec 28, 2002 | 01:42 AM
  #2  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
in order to check:

stuck 5th/6th ports

leaking injectors

bad engine grounds

bad spark plugs/wires

bad ECU ground
Reply
Old Dec 28, 2002 | 01:55 AM
  #3  
rx-7fc's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 865
Likes: 0
From: oakland Ca
i don't have 5th/6th ports i will check that stuff and i will let you know what i find out
Reply
Old Dec 28, 2002 | 02:11 AM
  #4  
2ndGen.rocket's Avatar
Ho's and Cadillac Doors
Tenured Member 10 Years
 
Joined: Apr 2002
Posts: 2,703
Likes: 1
From: ATL, GA
i had the problem, and fixed it with new plugs and wires, and free flow exhaust. People find that different things work for their cars. Some people re-ground the whole engine and the problem will go away, and some people have put on new exhaust and had it go away, like me. Not much of a real answer for the problem, other than to do what Icemark said, check each thing out and see if it helps.
Reply
Old Dec 28, 2002 | 12:27 PM
  #5  
Snrub's Avatar
Eats, Sleeps, Dreams Rotary
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jun 2001
Posts: 3,106
Likes: 0
From: London, Ontario, Canada
Test the throttle position sensor.
Reply
Old Dec 28, 2002 | 08:33 PM
  #6  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Originally posted by rx-7fc
i don't have 5th/6th ports i will check that stuff and i will let you know what i find out
If you have a GXL then you have a NA motor... all FC NA motors have 5th/6th ports.
Reply
Old Dec 28, 2002 | 09:02 PM
  #7  
HAILERS's Avatar
HAILERS
Tenured Member 10 Years
 
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
Erasing an wrong answer. Ignore.

Last edited by HAILERS; Dec 28, 2002 at 09:21 PM.
Reply
Old Dec 29, 2002 | 03:12 AM
  #8  
rx-7fc's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 865
Likes: 0
From: oakland Ca
i took the 5th/6th ports out Icemark
Reply
Old Dec 29, 2002 | 10:20 AM
  #9  
HAILERS's Avatar
HAILERS
Tenured Member 10 Years
 
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
http://home.earthlink.net/~burntoast............while yours isn't the same rpm, I'd still do it.
Reply
Old Dec 29, 2002 | 01:51 PM
  #10  
rx-7fc's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 865
Likes: 0
From: oakland Ca
the link does not work
Reply
Old Dec 29, 2002 | 01:56 PM
  #11  
AreExSeven's Avatar
Huh?
Tenured Member 10 Years
 
Joined: Nov 2001
Posts: 1,087
Likes: 0
From: Lost
Originally posted by rx-7fc
i took the 5th/6th ports out Icemark
I am not familiar with N/A's, but are the 5/6 ports not an integral part of the block? How can you remove them? I think you may be mistaken.
Reply
Old Dec 29, 2002 | 09:11 PM
  #12  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Originally posted by rx-7fc
i took the 5th/6th ports out Icemark
Ah that somertimes results in poor idle and hesitationat cross over (3800 RPM) but sledom higher than that
Reply
Old Dec 29, 2002 | 09:20 PM
  #13  
HAILERS's Avatar
HAILERS
Tenured Member 10 Years
 
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
http://home.earthlink.net/~burntoast/3700.html

Never hurt to do the above. By the way, your just using the stock injectors, are you not?
Reply
Old Dec 30, 2002 | 10:31 PM
  #14  
rx-7fc's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Dec 2001
Posts: 865
Likes: 0
From: oakland Ca
today i was driving and i was at like 6000rpm and it goes down to like 4000rpm then goes back up what kind of problem would that be it
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
Bauer778
3rd Generation Specific (1993-2002)
10
Nov 4, 2015 04:42 PM
Feffman
SE RX-7 Forum
1
Oct 7, 2015 06:57 AM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM




All times are GMT -5. The time now is 12:04 PM.