hesitation on hard cornering even after...
#5
tom port.. AKA streetport
Thread Starter
iTrader: (6)
Join Date: Jan 2005
Location: ludlow, pa
Posts: 4,659
Likes: 0
Received 0 Likes
on
0 Posts
thats the fuel strainer i replaced(sock). i put this in when i switched to the fd fuel pump since in 2 or 3 weeks im putting my turbo project together. i just wonder what else it could be!ita been doing this aince i bought it about a year ago!
Trending Topics
#9
tom port.. AKA streetport
Thread Starter
iTrader: (6)
Join Date: Jan 2005
Location: ludlow, pa
Posts: 4,659
Likes: 0
Received 0 Likes
on
0 Posts
well i filled the tank to just above 3/4's of a tank and no cut out! am i just gonna have to keep it topped off? i dont see that needing more than half a tank all the time to cure this problem? somthin has to be wrong somewhere?
#10
Former Moderator. RIP Icemark.
Originally Posted by 88rxn/a
well i filled the tank to just above 3/4's of a tank and no cut out! am i just gonna have to keep it topped off? i dont see that needing more than half a tank all the time to cure this problem? somthin has to be wrong somewhere?
So I would pull the pump, check the screen again, also check that the depth is good (that the assembly didn't get bent and the fuel pump is sitting too high).
I'd also check to see if there is any sign of rust or damage to the tank that the internal baffles are messed up
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM