help would not rev above 2500
02-19-09, 10:56 AM
#1
Junior Member
Thread Starter
Join Date: Sep 2008
Location: minnesota
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
help would not rev above 2500
Hello i just buy a 87 rx 7 5 speed has around 96000 miles on it the problem i have with the car is that it will start right up and start running as long as you dont turn it off but it would not rev above 2500 if you give it more gas at 2500 the rmp drop and it like it going to die once you take your foot off the gas it idol at normal i can drive it but it would not go above 2500 rmp any ideal on what causeing this problem i was thinking about jump the computer to see if there any code any one ever had this problem thank.
02-23-09, 05:20 PM
#4
Bongolio
03-01-09, 12:03 PM
#7
Junior Member
Thread Starter
Join Date: Sep 2008
Location: minnesota
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
well i unplug the tps and it make no difference, i also reset the computer on the car and no difference. The car has no cat i dont think this will cause it to not rev above 2500 any other reason why it doing this ?
Trending Topics
03-02-09, 11:34 AM
#10
I assumin you have a n/a right?
acceleration is all based on fuel and air(ignition too but we can disregard that because your problem is at 2500rpm)
what i would do is feel it out and try to guesstimate whether it is fuel cutting or air suffocation. trace it back from there. the first thing you need to do is download and print out the factory manual.it saved me thousands and a ton of confusion.
http://www.teamfc3s.org/main/factory...ual/1986_1988/
to me it sounds like a fuel delivery issue.possible vacuum leak to a sensor. but thats just my gut
good luck
acceleration is all based on fuel and air(ignition too but we can disregard that because your problem is at 2500rpm)
what i would do is feel it out and try to guesstimate whether it is fuel cutting or air suffocation. trace it back from there. the first thing you need to do is download and print out the factory manual.it saved me thousands and a ton of confusion.
http://www.teamfc3s.org/main/factory...ual/1986_1988/
to me it sounds like a fuel delivery issue.possible vacuum leak to a sensor. but thats just my gut
good luck
03-02-09, 12:00 PM
#11
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
There's no resetting the seires four ECU. The TPS on a series four can be removed and the car will run all day and into the night.
I suggested the TPS because I once had a similar problem. Drove to the store.....came out of the store........car started up just fine........but when throttle was applied the engine would not rev up............removed the TPS plug and drove home in a normal manner. Found the internal plunger or internal spring in the TPS was stuck causing fuel cut when the pedal was applied. Fixed TPS.
So. That's the reason I mentioned the TPS on your series four car. Other than that I've not a clue why it won't go above 2500rpm all of a sudden and according to you, idles fine. Possible afm problem??? Got me. Really clogged fuel filter? Really clogged fuel *sock* on the pump itself???? Bum fuel pump (put a gauge on the feed line and see what the pressure is).
I suggested the TPS because I once had a similar problem. Drove to the store.....came out of the store........car started up just fine........but when throttle was applied the engine would not rev up............removed the TPS plug and drove home in a normal manner. Found the internal plunger or internal spring in the TPS was stuck causing fuel cut when the pedal was applied. Fixed TPS.
So. That's the reason I mentioned the TPS on your series four car. Other than that I've not a clue why it won't go above 2500rpm all of a sudden and according to you, idles fine. Possible afm problem??? Got me. Really clogged fuel filter? Really clogged fuel *sock* on the pump itself???? Bum fuel pump (put a gauge on the feed line and see what the pressure is).
03-12-09, 10:42 AM
#13
Check to see if you have spark on the trailing side. Also test your tps to see if it is worn. When your car hits 2500 rpms does it fall on its face ? If so , its going to be a tps issue. I have had many do this and I find its the tps.
Thanks Robert
Thanks Robert
04-07-09, 11:52 AM
#14
Junior Member
Thread Starter
Join Date: Sep 2008
Location: minnesota
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
when the car hit 2500 if you step on the car more it start to die also i have to step on the gas slowly if i step on it too hard it start to die it like it not getting enough fuel, i have switch out the tps with one of my friend rx7 that run fine and it still does that so it not the tps, i was going to check for fuel presser and see what it say anyone have any idea what the fuel presser should be, i hate to change the pump and and that not the problem.
04-07-09, 02:06 PM
#15
Becoming pure track...
iTrader: (1)
Join Date: Feb 2005
Location: Olympia, WA
Posts: 1,069
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm, i have an S4, and without my TPS plugged in, my car will stumble and buck when I press the gas. Not driveable.
I would check the resistances on your TPS. make sure they are good. Then check your pressure sensor. Does the car idle well? Make sure the MAF is hooked up, maybe check the resistances on that too.
I would check the resistances on your TPS. make sure they are good. Then check your pressure sensor. Does the car idle well? Make sure the MAF is hooked up, maybe check the resistances on that too.
05-02-09, 06:02 PM
#19
Junior Member
Thread Starter
Join Date: Sep 2008
Location: minnesota
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
well finally after doing all the work on see what wrong with this car and i check pretty much eveything i could fuel pressor ejecter wire connection etc. I have finally got the rev problem with my rx7 fix with no HELP FROM ANYONE INCLUDEING THIS SITE it turn it out it was a lose connection going to the ecm. now i can go driving.
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM
