help on tighting the side mirror
Trending Topics
#8
Still has an RX7.
iTrader: (1)
Actually, there are more screws to tighten. I had this problem once. Very carefully remove the plastic triangle interior piece to access the 3 screws that fix the mirror in place. Loosen them out and remove the mirror.
You'll see the additional screws that attatch the mounting bracket to the mirror body itself. Tighten them up, then put the mirror back on. This is what I had to do on my S5 passenger mirror once. They were loose and just kinda rattled a bit. After tightening these hidden screws it was fine.
You'll see the additional screws that attatch the mounting bracket to the mirror body itself. Tighten them up, then put the mirror back on. This is what I had to do on my S5 passenger mirror once. They were loose and just kinda rattled a bit. After tightening these hidden screws it was fine.
#9
Buildup Thread Encourager
iTrader: (1)
Join Date: Jun 2005
Location: Miami, FL
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DesmoFO
$30 dollars, I just go to the junkyard and pocket one.
Over time they become brittle under the sun. It's a good idea to get new ones while Mazda still HAS them.
#10
Help Bring Back RR!
Join Date: Aug 2004
Location: Indianapolis
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
There is also a door panel screw below and to the right of the triangle piece. If you loosen up the door panel a bit, it makes it easier to pop out the triangle piece and less likely that you will break or crack it.
Thread
Thread Starter
Forum
Replies
Last Post