Help please, replacing PD
01-02-03, 10:24 PM
#1
Full Member
Thread Starter
Join Date: Apr 2002
Location: Arkansas
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Help please, replacing PD
Can anyone gives some tips on removing the throttle body and upper intake ? We have just about completed taking off the throttle body.
This is much harder than i had thought.
This is much harder than i had thought.
01-02-03, 10:56 PM
#3
Full Member
Thread Starter
Join Date: Apr 2002
Location: Arkansas
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Its a S4 n/A
Can anyone take a pic of the fuel line from the primary fuel to the secondary ? it does look right, like it was repiared and done very ghetto and a hose is not properly connected. There is fuel residue that we can see under the upper intake. so i am not sure if it could be that line b/c the connection wouldn't drip onto the engine and if the pulsation dampener is broken, where exactly does the fuel come out at?
Can anyone take a pic of the fuel line from the primary fuel to the secondary ? it does look right, like it was repiared and done very ghetto and a hose is not properly connected. There is fuel residue that we can see under the upper intake. so i am not sure if it could be that line b/c the connection wouldn't drip onto the engine and if the pulsation dampener is broken, where exactly does the fuel come out at?
Last edited by TriTurboGen3 RX-7; 01-02-03 at 11:03 PM.
01-02-03, 10:58 PM
#4
...
Join Date: Aug 2001
Location: Tampa, FL
Posts: 7,539
Likes: 0
Received 0 Likes
on
0 Posts
You can check out the Factory Service Manual on www.fc3s.org for free.
Trending Topics
01-03-03, 08:44 AM
#9
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
This from the http://www.iluvmyrx7.com and the fuel section of the series five. The series four isn't as clear.
Thread
Thread Starter
Forum
Replies
Last Post
t-von
3rd Generation Specific (1993-2002)
9
09-10-15 01:56 PM